Panasonic TC-L47ET5 Setup page 2

Panasonic 3D TV Setup
6. After you reset the defaults, the following Setup Screens will appear. On each screen,
select the setting described below and press OK to go to the next screen. To go back a
screen, press the Return button.
Screen
Select your language.
Select Country where this TV is being used.
Select your viewing environment.
Do you use a cable, satellite, or fiber optic
box with this TV?
Which wiring method is used to connect your
box to the TV?
What is connected to HDMI 1?
Network Settings
Set clock
7. When you see the Setup is complete message, press OK to exit.
8. Press the 3D button on the remote control to put the TV in 3D mode. Read the 3D warning
message. Where it says, "Would you like to display this message again later?" Highlight
No and press OK.
9. Press the MENU button on the remote control to open the Main menu again.
Note: The picture must be set to 3D before doing step 10.
10. Highlight Picture in the Main menu and press OK. Use the
Aspect adjustments (it is off-screen when you open the menu) and press OK. Do the
following steps in the Aspect Adjustments menu:
−
Use the
−
Use the
highlight this setting so you can see how your selection looks. If you do not set Size 2 the
Insert Coins message will be off-screen).
−
Press Return to go back to the Picture menu.
11. Highlight Picture mode in the Picture menu and use the
12. Press Return to go back to the Main menu.
13. Highlight Setup in the Main menu and press OK to open the Setup menu.
14. Highlight 3D Settings in the Setup menu and press OK. Do the following steps in the 3D
Settings menu:
−
Use the
−
Use the
−
Press Return to go back to the Setup menu.
Page 2 of 2
040-0256-01 2/6/2013
buttons to set Screen Format to FULL.
buttons to set HD Size to Size 2 (Note: The TV will hide the menu when you
buttons to set Auto Detect 3D to Auto 2.
buttons to set 3D Signal Notification to Off.
Setting
English
U.S.A. (Set this even if located elsewhere.)
Home Use
Yes
AV IN
Leave all entries on this screen blank. Use the
key to highlight Next and press OK
Set Later
Use the key to highlight Next and press OK.
(The game does not use TV date and time settings.)
button to scroll down to
buttons to set it to Vivid.
© 2013 Global VR, Inc.