Table of Contents
Advertisement
Quick Links
l Trademarks ----------------------------------------------------------------------------
l Introduction ---------------------------------------------------------------------------
l Hardware Requirements ------------------------------------------------------------
l Package contents ----------------------------------------------------------------------
l Hardware installations ---------------------------------------------------------------
Identifying Components---------------------------------------------------------
Install IDE 2.5" HDD ------------------------------------------------------------
l
Start from Windows
l Windows
l Indicator Descriptions ----------------------------------------------------------------
l Safely Remove The Easy IDE -------------------------------------------------------
n Trademarks
All name and product's trademarks mentioned below are the property of their respective companies.
n Introduction
The Easy IDE is an USB 2.0 to IDE adapter, which allows you directly access to an existing ATA/ATAPI
IDE interface device such as 3.5"hard disk drive, CDR/W and DVD ROM etc without any ID or jumper
setting requirement. It implements a quicker, easier, more flexible way to access and backup your
valuable data to your storage equipment.
n Hardware Requirements
®
IBM
PC or Macintosh
l
Support all standard ATA/ATAPI IDE interface storage drives.
l
U
S
B
2
.
0
E
U
S
B
2
.
0
E
®
®
98SE Installation --------------------------------------------------------
®
computer with one USB2.0 host connector.
A
S
Y
I
D
E
A
D
A
S
Y
I
D
E
A
D
INDEX
A
P
T
E
R
A
P
T
E
R
--------------------------
1
1
1
2
2
2
3
4
5
6
11
11
Advertisement
Table of Contents
Summary of Contents for Eksitdata Easy IDE
-
Page 1: Table Of Contents
All name and product’s trademarks mentioned below are the property of their respective companies. n Introduction The Easy IDE is an USB 2.0 to IDE adapter, which allows you directly access to an existing ATA/ATAPI IDE interface device such as 3.5”hard disk drive, CDR/W and DVD ROM etc without any ID or jumper setting requirement. -
Page 2: Package Contents
F Do not handle with wet hands. Otherwise there is an increased risk of electric shock. F Touch the exposed metal casing of your computer's power supply before you handle the Easy IDE adapter and storage device to prevent the damage from static discharge. -
Page 3: Install 3.5", 5.25" Hdd Or Cdrom/Cdr/W/Dvdrom Drive
5. Connect Easy IDE USB cable to your PC host’s USB2.0 port. 6. Press the side of ‘ • ’ mark on power switch to turn ON the Easy IDE. 7. You can refer to following figures of drive installation. -
Page 4: Install Ide 2.5" Hdd
40-pin to 44-pin Converter If you want to connect Easy IDE to a 2.5” slim hard drive, a 40-pin to 44-pin converter will be required. This accessory is an optional item, it may not include for this package. But you can refer to following photo and purchase this from your local dealer. -
Page 5: Me? 2000? Xp And Mac Os
ME? 2000? XP and Mac OS ® ® ® This Easy IDE is driver-free for Windows ME? Windows 2000? Windows XP and Mac OS, you don’t have to install any driver or jumper setting just connect a device directly. Windows will automatically detect and install all related programs in system’s driver database, then a... - Page 6 ® n Windows 98SE Installation Insert driver CD into the CD-ROM drive. Connects device to the computer, the system will detect a new hardware and pop out an “Add New Hardware Wizard” windows. Click? Next? . Select ”Recommended” item then click? Next? to continue.
- Page 7 You should see a new window to specify a location for the driver. Check ”Specify a location” item then click? Browse? to search the CD ROM driver program location. Select to the Driver folder in CD-ROM, Click? OK?
- Page 8 After specify a location then Click? Next? to continue. Windows will load the driver from disc and install it automatically.
- Page 9 Click ? Finish? to complete the driver installation. To confirm that the Easy IDE has been correctly installed, check your Device Manager in System Properties. You should see a new reading of your hard drive type in “Disk Drives” titled.
- Page 10 Select? Settings? tab and check ? Removable? box, then click? OK? . Click ? Yes? button to complete the system setting change, and you must restart your computer again.
-
Page 11: Indicator Descriptions
“Eject” command at status bar’s file menu to eject this storage device and safely remove the Easy IDE adapter. WARNING: Please don’t remove the Easy IDE adapter or power off the switch while data is transmitting, this may crash your computer and lost the valuable data. P/N: 404-EASYIDE...
Need help?
Do you have a question about the Easy IDE and is the answer not in the manual?
Questions and answers