OVERVIEW SPECIFICATIONS • 3 Axis Active Stabilisation including Tilt, Roll and Pan • Gesture Control System • Customised High Quality Motors • Maximum +/-0.1 Degree Leveling Error • Compatible with: iPhone, Samsung Galaxy S Series and similar sized smartphones. • Plug and Play-no assembly required! •...
3-AXIS FUNCTION TILT/PITCH AXIS Slows down the rate of tilt/pitch in order to stabilise against sudden and quick tilting motions. To tilt the camera angle, simply tilt the stabiliser forward (away from you) or backward (towards you). PAN AXIS Slows down the rate of panning/turning to stabilise against sudden and quick turning.
Page 5
video marketing Powered by HouseLens CONTROL BOARD inside the box ROLL AXIS Stabilises the smartphone against side to side movement of the handle. TIPS Spend some time to observe the behaviour of the stabiliser in order to familiarise yourself with its characteristics. Please power off the stabiliser before removing your smartphone otherwise the stabiliser will vibrate.
QUICK START Expandable Clamp STEP 1 Slide your smartphone (smartphone case off) into the clamp. Keep it balance along the horizontal or the pitch direction. Note: Don’t turn on the power before sliding the smartphone into the clamp. STEP 2 Adjusting the counterweight to balance it along the roll direction.
Page 7
video marketing Powered by HouseLens Charging the Battery When the RED LED light blinks please charge or insert another battery. The RED light on the charger indicates charging, the GREEN light indicates fully charged. STEP 3 Press the power button. This will enable the stabiliser to keep the smartphone stabilised.
SETUP INSTRUCTIONS FOR LARGE SMART smartphones smartphones • Install counterweight on LEFT side • Use one counterweight • Without smartphone case on...
Page 9
video marketing Powered by HouseLens TPHONES • Install counterweight on RIGHT side • Use three counterweights • Without smartphone case on...
WIDE ANGLE LENS 0.65x Wide Angle Lens Universal clip wide angle lens for wider view and better area coverage. Simply clip the wide angle lens to your smartphone camera. Note: Make sure your stabiliser is off while you adjust the wide angle lens on your smartphone!
TROUBLESHOOTING Q: The stabiliser won’t stabilise and won’t hold my smartphone horizontal at all. A: Ensure that you have charged the battery of the stabiliser before operating it and then repeat Step 2 of the Quick Start guide. Also ensure that the phone is secured in the clamp or the stabiliser will have issues achieving balance.
Page 12
video marketing Powered by HouseLens For more information please contact EAC customer service on 1300 137 161 or email: feedback@eac.com.au Serial No.: Please keep a record of the serial no., it is an important code for after sales service.
Need help?
Do you have a question about the Handheld 3-Axis Stabiliser for Smartphones and is the answer not in the manual?
Questions and answers