Overheating Cut-Out; Disconnecting The Battery; Switching Off - ALDI AUTOXS MD 19787 User Manual

Overheating cut-out

Overheating cut-out

If the appliance temperature exceeds 115°C, the overheating cut-out is triggered, and
the charging process is interrupted until the appliance has cooled off. The display
continues to show the charge level.

Disconnecting the battery

WARNING!
Risk of explosion!
Improper handling of the charger can result in sparks and trigger
an explosion.
Gaseous hydrogen may fl ow out of the battery during charging
and trickle charging. Contact with an open fl ame can trigger a
highly explosive gas detonation.
− Disconnect the appliance from the mains before disconnecting
the terminal clamps on the battery.
− Observe the correct sequence when disconnecting the battery
terminal clamps.
When disconnecting the battery from the charger, proceed in the following order:
− After charging, disconnect the appliance from the mains power.
− Detach the negative terminal clamp (black) from the battery's negative terminal.
− Detach the positive terminal clamp (red) from the battery's positive terminal.
− Reconnect the vehicle's positive terminal connection cable to the battery's
positive terminal.
− Reconnect the vehicle's negative terminal connection cable to the battery's
negative terminal.

Switching off

− Switch the charger off by pulling out the mains plug.
32