Table of Contents
Advertisement
Quick Links
DESIGNER STYLED
MARINE TOILET
With Quiet-Flush System
FEATURES
• Very quiet flush cycle—like a household toilet
• Single button flush actuator—with dual function water
level control switch
• All toilet plumbing and wiring connections are
internal-out of sight
• Supplied with Solenoid Valve and Siphon Breaker to
control bowl rinse water from any pressurized system
that provides 3-1/2 gpm minimum.
• Solenoid Valve and Siphon Breaker assembly allows
toilet to be plumbed to potable water.
• Vitreous china bowl available in compact 14" height
or standard 17" height
• Available in White or Bone
• Sturdy designer molded plastic seat & cover
• High capacity waste macerator and bowl discharge
pump
SPECIFICATIONS
Ports:
Inlet – 3/4" Hose Barb
Outlet – 1" Hose Barb
Motor & Switch: Toilet Meets U.S.C.G.
Regulation 183.410 and
ISO 8846 MARIn E for
Ignition Protection.
Toilets are marked
comply with En 50081-1 for
suppression of electro-
Normal Water
magnetic interference.
Consumption:
1-2 Quarts (Litres)/Flush
OPERATION
The Designer Styled Toilet with the popular Quiet-Flush
system provide both quiet operation and user control of
water levels in the toilet bowl. A single large push-button
switch provides a simple flush mode by activating both the
rinse water supply and the macerator discharge pump
simultaneously. An additional rocker switch offers inde-
pendent control of the rinse water supply and discharge
Model Number
37075-0092
and
37075-0094
37075-1092
37075-3092
37075-1094
37075-3094
pump separately so the bowl water level can be easily
raised or lowered by the user. This provides a method of
minimizing water use, when desired, as well as a means
of raising the water level in the bowl when appropriate for
user comfort. It also allows for complete evacuation of the
bowl water while underway in rough sea conditions.
MODEL 37075-SERIES
Description
Compact White Toilet 14", 12 Volt EMC
Compact White Toilet 14", 24 Volt EMC
Standard White Toilet 17", 12 Volt EMC
Standard Bone Toilet 17", 12 Volt EMC
Standard White Toilet 17", 24 Volt EMC
Standard Bone Toilet 17", 24 Volt EMC
Advertisement
Table of Contents
Related Manuals for Xylem JABSCO 37075 Series
Summary of Contents for Xylem JABSCO 37075 Series
- Page 1 MODEL 37075-SERIES DESIGNER STYLED MARINE TOILET With Quiet-Flush System FEATURES • Very quiet flush cycle—like a household toilet • Single button flush actuator—with dual function water level control switch • All toilet plumbing and wiring connections are internal-out of sight •...
-
Page 2: Installation
INSTALLATION assembly is attached to a wood surface, 3/8" (10 mm) long screws are generally adequate to support the The 37075-Series Designer Styled Toilet includes the weight of the valve assembly. If desired, the valve Quiet-Flush Toilet pumping system and is supplied with assembly may be installed inside a cabinet or locker to a solenoid valve/siphon breaker to control the supply of conceal it from view of the vessel’s occupants. - Page 3 If the toilet is plumbed to an overboard discharge, and is Once all hose connections are completed and secured below the vessel’s waterline, the discharge plumbing with clamps, it is best to complete the wiring so the toilet must include a properly positioned vented loop. The can be tested for leaks prior to fastening it to its mount- vented loop fitting must be secured in a location that ing surface.
-
Page 4: Electrical Specifications
ELECTRICAL The electrical wiring should be independent of all other To install the switch panel, drill two 1-3/4" (45 mm) diam- eter holes (slightly over-lapping) through the selected accessories. It should be made with marine grade cop- switch mounting surface per the attached template. per stranded wire of the gauge specified in the electrical Ensure the template is oriented correctly because it is specifications chart. - Page 5 WASTE PUMP SERVICE with a small amount of water resistant grease. Ensure the slinger is properly positioned on the motor shaft next The Jabsco Quiet-Flush Toilet does not require routine to the motor and slide the seal housing onto the motor maintenance other than occasional cleaning to maintain shaft until it is against the motor end bell.
-
Page 6: Exploded View
EXPLODED VIEW PARTS LIST Qty. Part Qty. Part Description Req. Number Description Req. Number † Seat & Cover 37078-1000 Seal 1040-0000 † Bowl, Compact Size, White 37076-0010 Screw 91010-0144 † Bowl, Standard Size, White 37076-1010 Washer, Plastic* 35445-0000 † Bowl, Compact Size, Bone 37076-2010 Seal Housing 37043-1000... - Page 7 DIMENSIONAL DRAWINGS Inches (Millimeters) 1 Dia (25.4) Compact Size Bowl Standard Size Bowl 19-3/16 (487) 19-3/16 (487) 8-1/2 15-1/2 (394) 15-1/2 (394) (216) 14-1/4 (362) 17-1/4 (438) 13-1/2 (343) 8-7/8 (225) 8-7/8 (225) 11-13/16 (300) 11-13/16 (300) 8-7/8 (225) (254) 16-3/4 (425)
-
Page 8: One-Year Limited Warranty
Jabsco Italia, s.r.l., Via Tommaseo, 6, 20059 Vimercate, Milano ITALY Tel: +39 039 685 2323 Fax: +39 039 666 307 Jabsco is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem, Inc. 43000-0659 Rev B 10/2012...