Advertisement
Quick Links
+
DG800
Combined Proximity
and Keypad Access
•
Operating voltage 12Vdc
•
Die-cast Aluminium
•
Bluetooth
•
Backlit keypad
•
Weather resistant: IP65
•
Vandal resistant
•
Multiple LED display with audible indication
WEATHER
VANDAL
BLUETOOTH
RESISTANT
RESISTANT
− IP 65 −
OPTIONS
STD-PC
STD-PCPS
79
120
KT-10BC
KT-15EM
DG800+
(DG800+ & DG160+
have same wiring and pin setting)
LED
BLUE
POWER ON, STANDBY MODE
GREEN
UNLOCKED, DOOR ALWAYS UNLOCKED
21
RED
INVALID ACCESS, DOOR ALWAYS LOCKED
KT-16
621-11
DG160+
STATUS
AUDIBLE BEEPS
1 SHORT BEEP
1 LONG BEEP
2 SHORT BEEPS
3 SHORT BEEPS
CONSTANT
BEEPING
Setting the Standard in Access Control
Access control
STATUS
KEY PRESS
VALID ACCESS, RESET IS COMPLETE
LOCKING COMPLETE
INVALID ACCESS
BLUETOOTH DEVICE VANDALISED
DOOR SENSOR IS ON
37
Advertisement
Related Manuals for Gianni Industries GEM DG Series
Summary of Contents for Gianni Industries GEM DG Series
- Page 1 Access control DG800 Combined Proximity and Keypad Access • Operating voltage 12Vdc • Die-cast Aluminium • Bluetooth • Backlit keypad • Weather resistant: IP65 • Vandal resistant • Multiple LED display with audible indication WEATHER VANDAL BLUETOOTH RESISTANT RESISTANT − IP 65 − OPTIONS STD-PC STD-PCPS...
-
Page 2: Specifications
DG Series Access Control Proximity Readers DG-800 DG-160 Features: Specifications: • Applicable card mode：EM Card / Key Fob • Operating Voltage：12 to 24 VDC • 1 Administrator and 200 Users • Bluetooth Module：BLE 4.2 Bluetooth Low Energy • 200 Proximity Cards / Key fobs •... - Page 3 DG Series Pre-Installation DG-800+ & DG-160+ Parts List： Flat head phillips screws, Torx screw 3x8mm x1 Torx wrench x1 Cone point Anchor bolts x4 Crimp connectors x12 Proximity EM cards x2 Proximity key fob x1 LED & Audible Indicators Status Audible Beeps Status Blue...
- Page 4 Install Crimp Connectors Crimp connectors Crimp connectors included: Use a pair of crimping pliers designed to crimp insulated connectors. Place the crimp connector into the compression slot. Be sure the crimping jaws are positioned over the stripped portion of the wire. Squeeze the handles together with enough force to crush the end of the butt splice. DG Series Keypads Installation DG-800 Installation Template...
- Page 5 Software App Operations 1. Download Easiprox App (for model Easiprox+ Series and DG Series) Download E5AKR App to set up. Scan QR Code on the left or download the App from Apple Store or Google Play depending on what kind of smartphone you use.
- Page 6 Software App Operations 3. Administrator ” Settings” Page Introduction Tap “Settings” to view or change setting functions in Users “Setttings” Page. Users： ① (See Figure 1 below) a. Add / Delete / Edit user information. b. If there are many users, you can search User ID (Enter an User ID to search user). (See Figure 2 below) c.
- Page 7 Software App Operations ② ③ ④ Figure 6 Figure 7 Figure 8 Figure 4 Figure 5 Restore Backup ④ (See Figure 8) Restore the last backup data by Admin’s phone to a new Access Control Keypad / Reader. Step 1：Press “Restore Backup”, the App will show： Restore all data now? Step 2：Press Confirm, the App will show：...
- Page 8 Software App Operations 4. User’s ” Settings” Page Introduction Tap “Settings” to view or change setting functions in User’s “Settings” Page. (See Figure 9 below) • Device Name：User can only view the Device Name. (See Figure 10 below) • Auto Proximity Range：User can adjust Auto proximity range between 0 to maximum 20 to access. May have different results under different circumstances.
-
Page 9: Warranty
Warranty This Gianni product is warranted against defects in material and workmanship while used in normal service for a period of one year from the date of sale. Gianni’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to Gianni. Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason Gianni determines that such equipment is not operating properly as a result of causes other...