Advertisement
AL LaserTESTER
AL Laser Tester is a LED laser signal emitter with different laser
frequencies stored in its microprocessor. At default factory setup it
can simulate 9 known laser signals.
USE
AL Laser Tester operates on a 9V battery (provided with the
product). Press and hold the Button and direct the tester towards
the laser receiver that is being tested. While the button is kept
pressed a red LED will indicate that the laser tester is emitting a
laser signal. The tester emits 9 different LIDAR frequencies. They
alternate in sequence of 5 seconds for each LIDAR. To test a
specific LIDAR from the list aim the tester at the receiver only
when desired LIDAR is about to commence emiting. Before
a signal is emitted red LED will blink the number of times showing
the ID of the LIDAR from the list:
1. Ultralyte 100
2. Ultralyte 200LR/Compact
Marksman/LaserCam
3. Trafipatrol XR
4. Prolaser 2
CAUTION:
d
IR Laser tr
Made in Croatia, YOP 2010
5. Prolaser 3
6. Laser Atlanta Stealth
7. Stalker LZ1
8. Amata Video Laser
9. Zurad Rapid Laser
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Al priority Laser Tester
- Page 1 Press and hold the Button and direct the tester towards the laser receiver that is being tested. While the button is kept pressed a red LED will indicate that the laser tester is emitting a laser signal. The tester emits 9 different LIDAR frequencies. They alternate in sequence of 5 seconds for each LIDAR.
Need help?
Do you have a question about the Laser Tester and is the answer not in the manual?
Questions and answers