Download Print this page
Adventure Force Vulcano Instruction Manual

Adventure Force Vulcano Instruction Manual

Advertisement

Quick Links

Contents
- RC T-Rex x 1
- RC Transmitter (Transmitter) x1
- Water Rump x 1
1. Alkaline batteries are recommend to be used
2. Only batteries of the same or equivalent type as recommended are to be used
3. Do not mix alkaline, standard or rechargeable batteries
4. Do not mix old and new batteries or different type of batteries
5. Non-rechargeable batteries are not to be charged
6. If rechargeable batteries are to be used, they are only to be charged under adult supervision
7. Rechargeable batteries are to be removed from the product before they are charged
8. Be sure to insert batteries with correct polarities and always follow the battery manufacturer's instructions
9. Remove all batteries from the Vehicle and Transmitter when not in use
10. Exhausted batteries are to be removed from the product
11. The supply terminals are not to be short-circuited
12. Dispose of batteries properly / Do not dispose the batteries in fire - it may cause them to explode or leak causing injury or damage
13. Battery installation and removal must only be done by an adult
Battery Installation
For T-Rex (Fig. 1 and Fig. 2)
1. Switch OFF the power
2. Unscrew the screw on the battery cover
3. Open the battery cover
4. Install 3 new 1.5V"AA" batteries with correct polarities (+/-)
5. Close the battery cover
6. Tighten the screw on the battery cover
T-Rex
Fig. 1
How To Fill In Water For Smoking Effect
1. Fill in clear water into the water purmp.
Fig. 5
2. Open the cap of water tank on the T-Rex (Fig.5 and Fig.6)
Fig. 7
3. Fill in clear water to T-Rex by using the provided
water pump. (Fig.7)
NO.:
87412
573756056
PRO. SYSTEM
RC Transmitter x 1
T-Rex
Fig. 2
6
age
15
(49 feet)
RC T-Rex x 1
For Transmitter (Fig. 3 and Fig. 4)
1. Unscrew the screw on the battery cover
2. Open the battery cover
3. Install 2 new 1.5V "AA" batteries with correct polarities (+/-)
as shown inside the battery compartment
4. Close the battery cover
5. Tighten the screw on the battery cover
Transmitter
Fig. 3
Move Forward
2.4 GHz
Signal light
Fig. 6
Fig. 8
4. Close the cap firmly. (Fig.8)
3 x AA
For T-Rex
(Included)
2 x AA
For Transmitter
(Not Included)
Light, Sound
& Smoking
Transmitter - Battery Installation
Effect
Fig. 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vulcano and is the answer not in the manual?

Questions and answers

Summary of Contents for Adventure Force Vulcano

  • Page 1 NO.: 87412 573756056 PRO. SYSTEM Contents 3 x AA - RC T-Rex x 1 For T-Rex (49 feet) (Included) - RC Transmitter (Transmitter) x1 - Water Rump x 1 2 x AA For Transmitter (Not Included) RC Transmitter x 1 RC T-Rex x 1 1.
  • Page 2 How To Bind 87412 573756056 1. Turn on the T-Rex. 2. Hold the Signal Match Button for around 4 seconds then the Transmitter signal light will flash for 6-7 second. 3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing. 4.

This manual is also suitable for:

87412573756056