Advertisement
Advertisement
Table of Contents
Summary of Contents for Big Bee SCL 96
- Page 1 Big Bee Rotary Cutter Owner’s Manual SCL 96 SCL 120 SCD 120...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Due to the type of performance for which this machine was designed, the operator should be very careful and practice all safety precautions during operation. Being of basic design throughout the farm equipment industry. Rotary cutters have fast moving blades that can throw objects that the operator runs over. - Page 3 SAFETY PRECAUTIONS - CONTINUED 9. Never position yourself under the machine for any reason. It could fall on you! Never manually feed the machine for any reason. Never put your hands or feet under the deck of the cutter without first being sure that the blades have ceased all movement and all power is shut off.
- Page 4 ASSEMBLY AND SET-UP INSTRUCTIONS A. Set up A-frame and position hitch pins in proper position. Be sure to use lock washers and tighten bolts securely. Attach flex chain brace to A- frame then fasten chain end on tailwheel adjustment bracket. B.
-
Page 5: Operation
OPERATION 1. Check gearbox for lubricant. 2. Check all lubrication points on PTO shaft and tailwheel. 3. Be sure all bolts are tight and snap rings are in place. 4. Be sure the rotary cutter is properly mounted on the tractor. 5. -
Page 6: Starting For The First Time
STARTING FOR THE FIRST TIME 1. If everything is in place and the rotary cutter is properly connected to the tractor, start the tractor and raise the rotary cutter slowly. While watching the PTO shaft, raise and lower the rotary cutter until you have positioned the PTO shaft to the shortest telescoping point. - Page 18 IT IS UP TO YOU REMEMBER: SAFETY FIRST!!! BETTER TO BE “SAFE” THAN “SORRY” Don’t find out the hard way that careless actions can make you, your family, your friends, or an innocent by-stander the victim of an accident. Safety is an everyday need.
-
Page 19: General Maintenance
In order for your Big Bee Rotary Cutter to be covered by our warranty policy, the equipment registration form on the back cover must be completed and returned within 10 days after the purchase date. - Page 20 OWNER REGISTRATION Owner’s Name: __________________________________________ Street Address: ___________________________________________ City: _____________________________________________________ County: _________________________________________________ State: ___________________________________________________ Zip: ______________________________________________________ Purchased From: _________________________________________ Street Address: ___________________________________________ City: _____________________________________________________ County: _________________________________________________ State: ___________________________________________________ Zip: ______________________________________________________ Date Purchased: _________________________________________ Date: ____________________________________________________ Owner’s Signature: _______________________________________ Model: __________________________________________________ Equipment Name: _______________________________________ Size: _____________________________________________________...
Need help?
Do you have a question about the SCL 96 and is the answer not in the manual?
Questions and answers