CADMEN CM-AF142SO Installation Instructions

D o o r Ac t iv ati o n D e v i c e s
CM-AF142SO
Single Gang Multi-color Dome Light, with Sounder
INSTALLATION INSTRUCTIONS
THIS PACKAGE INCLUDES
(1) Foam Gasket
(1) O Ring
(1) Set of Labels
(1) LED Base
1. DESCRIPTION
Camden CM-AF142SO Multi-color Dome Light, provides both
visual and audible annunciation. It mounts to a standard
single gang electrical box. The Superbright LED's along with
the wedged shaped lamp cover provides visible illumination
from either end of a corridor. The integrated piezo buzzer with
adjustable volume provides up to 93 dB at 1 metre (3 feet).
2. SPECIFICATIONS
Voltage
Illumination
Sounder
Current Rating
Dimensions (Body)
3. SOUND VOLUME ADJUST
Using a small Phillips screwdriver, gently turn the volume
adjustment counter clock wise to reduce the volume and
clockwise to increase the volume.
(1) Lens
(1) 2-28 x 5/16"
Phillips locking screw
(2) Concrete wall plugs
12/24V AC/DC
Superbright LED's
Piezo, 93 dB max. @ 1 metre (3 ft.)
70 mA Max for one color wire.
Combining more than one color
wire = 130 mA.
4 9/16" H x 2 15/16" W
(115mm x 75mm)
(2) #6 x 3/4" self-tapping screws
(2) 6-32 x 3/4" screws
(4) Wire nuts
(2) 3/16" drywall plugs
4. WIRING
Camden CM-AF142SO Multi-color Dome Light is easily wired
using the two of the four color coded wires supplied; Black
(BLK), Red (RED), Green (GRN) and Blue (BLU). Using the BLK
wire as common, selecting one of the three color wires to
complete the circuit will determine the color of the Dome light.
The black wire lead and any one of the color coded wires can be
connected to either an AC or DC power source supplying 12
or 24 volts.
-
+
- Use black wire
for common
- Select red wire
for red color
- Select green wire
for green color
- Select blue wire
for blue color
12-24
AC/DC
Power
Page 1 of 2