1. Manuals
  2. Brands
  3. BETHLEHEM LIGHTING Manuals
  4. Artificial Pine Trees
  5. 6.5’ Tinsel Tree
  6. Instructions

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Instructions

Hide thumbs
1
2
3
Table of Contents

Advertisement

Quick Links

Download this manual

Included Parts:

Pre-lighted Tree Top.
Middle Section of Pre-lighted Tree.
Bottom Section of Pre-lighted Tree.
Replaceable lights and fuses.
Collapsible Stand with 3 triangular screws attached in a plastic bag.
Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting
strings or decorative outfits to each load fitting. Do not interconnect different types of products.
Caution Notice: Before assembling the tree, test each section to ensure lights are working properly. Take
the plug stack from each section and plug it into an extension cord or power strip. If there is a light set
that does not light refer to the Trouble Shooting section below. If all light strands are working properly
continue setup. Repeat for each section.

Setup Instructions:

Step 1: Position and Set-Up Tree Stand

a. Place tree stand in desired location.
b. Unfold tree stand until the legs are perpendicular and the screw holes are aligned.
c. Insert the tree screws into the screw holds and turn 3 – 4 turns only (if the screws are inserted too
far you will not be able to fully insert the tree pole).
Made in Thailand
6.5' Tinsel Tree Instructions
1
Indoor Use Only
H196431022012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6.5’ Tinsel Tree and is the answer not in the manual?

Questions and answers

Summary of Contents for BETHLEHEM LIGHTING 6.5’ Tinsel Tree

  • Page 1 6.5’ Tinsel Tree Instructions Included Parts: Pre-lighted Tree Top. Middle Section of Pre-lighted Tree. Bottom Section of Pre-lighted Tree. Replaceable lights and fuses. Collapsible Stand with 3 triangular screws attached in a plastic bag. Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting strings or decorative outfits to each load fitting.
  • Page 2 Step 2: Insert the Bottom Section into the Tree Stand a. Insert the bottom tree section (bottom section is marked with “C”) into the stand. b. Let the hinged branches fall into place. c. Adjust the branch tips for desired appearance (some people chose to perform this step when the tree is fully assembled).
  • Page 3 Step 5: Make final adjustments to tree tips and decorate if desired. Please note: a light strand will go out only if there is a missing, damaged, or loose connection in the socket of the light; if a bulb is burnt out the strand will stay light. Safety First: Unplug power supply cord when replacing lamps and fuses.

Table of Contents