Using Lithium Cells; Tips For Proper Battery Care And Use - Caiman NITEHOG TIR-M50 Manual

USING LITHIUM CELLS

USING LITHIUM CELLS
The device is capable of operating with two types of batteries - lithium and Li-Ion.
The Li-Ion batteries are automatically recognized by the device.
When using lithium cells, you have to "inform" the device by following these steps:
1
Make sure, that the device is in "power off " state;
2
Insert the two lithium batteries in the device (following the upper instructions);
3
Press and hold (do not release it);
4
Power on the device (with pressed
5
Hold until the display lights up;
6
Release .
NOTE
When intending using only lithium cells, these steps should be performed only one time!
The battery levels are as follows:
battery is fully charged
battery has 75% residual charge
battery has 50% residual charge
battery has 25% residual charge
battery is fully discharged
18
);

Tips for proper battery care and use

Tips for proper battery care and use
Use the correct size and type of battery, specified in the technical description and
user manual.
Keep battery contact surfaces and battery compartment contacts clean. For this pur-
pose you can use a clean pencil rubber or a rough cloth each time you replace batter-
ies.
Remove the batteries from the device when it is left in storage for a longer period
of time.
Make sure that you insert batteries into your device properly (with the + (plus) and
– (minus) in the correct position).
Store batteries in a dry place at normal room temperature.
Extreme temperatures reduce battery performance.
Do not attempt to recharge a battery, unless the battery specifically is marked "re-
chargeable."
Do not dump-out used lithium batteries! They need to be kept into appropriate
places.
19