Advertisement
Available languages
Available languages
REAR PADDLES CUSTOMIZATION
1.
Select profile 1 or 2 with the rear
configurations.
2.
Select
Program
3.
To program paddles press and hold
flashing.
Then press the selected button to map
paddle from
M1 to M4
program is completed
All the buttons except SHARE, OPTIONS,
The default configuration is:
M1 /
X
M2 /
M3 /
M4 /
MODE
with the rear switch.
SET
to store the mapped button. Lighting bar stop flashing and the
switch. You can store up to 2 differents
(Normal
mode disables the programmed paddles)
button for 3 seconds, RGB lighting bar starts
(X for
example) and then press the selected
PS
and
TRIGGERS
can be mapped.
Advertisement
