Place the top lock (A) over the mailbox (G) so that the holes match the appropriate drilling ho-
•
les.
Screw two screws (B1) into the drilled holes.
•
Secure the screws from the inside with two nuts (C).
Place the bottom lock (D) so that the holes match the appropriate drilling holes.
•
Screw two screws (B1) into the bored holes.
Secure the screws from the inside with two nuts (C).
Atta-
ching
the
flag
Place one washer (H) on the front and one on the rear of the flag (E).
•
Put the flag (E) in the appropriate drilling holes.
•
Screw the long screw (B2) into the top hole and the short screw (B1) into the bottom hole.
•
Secure the screws from the inside with two hexagon nuts (C).
•
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
November 2019 Version 7
Seite 4