Download Print this page

EasyPro Aqua Fountain Installation Instructions

Advertisement

Quick Links

Thank you for your purchase of an EasyPro Aqua Fountain. The Aqua Fountain will enhance the beauty
of your pond or lake with reliable performance. Each EasyPro Aqua Fountain comes assembled for easy
installation.
The AF50 (1/2 hp, 115 volt) and AF100 (1 hp, 115 volt) models come with a timer and GFCI panel.
The AF1002 (1 hp, 230 volt) includes timer but not GFI (this must be purchased locally for proper
operation of this unit).
SAFETY AND HANDLING INSTRUCTIONS
• Under NO circumstances should anyone enter the water with the electrical equipment
plugged in and/or in operation.
• Exercise caution with any electrical equipment with moving parts.
• Never run the unit out of the water. This can cause damage to the unit and is dangerous for the
operator.
• Units not for use in brackish or salt water applications.
• Never lift or pull the unit by the power cord.
• Do not use waders in deep ponds/lakes or pond/lakes with drop offs, drastic slopes or soft bottom
material.
• Do not use boats that tip easily for fountain installation. Follow all boating safety rules and
regulations, including wearing a PFD (personal flotation device).
• To reduce the risk of electric shock the units should be plugged into a GFCI breaker that is properly
grounded. Be sure to test the GFCI breaker upon installation and every month thereafter to ensure
proper operation.
1
INSTALLATION
Remove unit and power cord from packaging. Inspect unit for any damages in shipping. Notify
the shipping company immediately or your EasyPro dealer about any damage. (Optional Step:
A light kit may be installed on the fountain before launching
unit in the water. Follow the installation instructions for the
2
EasyPro two or three light kit.
Choose your nozzle. To change the nozzle (umbrella or
rocket spray) simply remove the gray cover and thread
the nozzle into fountain head. Nozzle slots may vary slightly.
AF50 • AF100 • AF1002
Aqua Fountain
Installation Instructions
Umbrella Nozzle
Rocket Nozzle

Advertisement

loading

Summary of Contents for EasyPro Aqua Fountain

  • Page 1 AF50 • AF100 • AF1002 Aqua Fountain Installation Instructions Thank you for your purchase of an EasyPro Aqua Fountain. The Aqua Fountain will enhance the beauty of your pond or lake with reliable performance. Each EasyPro Aqua Fountain comes assembled for easy installation.
  • Page 2 Authorized EasyPro Seller. Ensure the product is properly packaged and insured for the replacement value. Damage due to improper packaging is the responsibility of the sender. ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEAREBY LIMITED IN DURATION TO THE DURATION OF THE WARRANTY AS DESCRIBED ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. EasyPro shall not be held liable for any damages caused by defective components or materials of this Product; or for loss incurred because of the interruption of service; or any consequential/incidental damages and expenses arising from the production, sale, use or misuse of this Product. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this Product. This warranty gives you specific legal rights, and you may also have other rights that vary from State to State.

This manual is also suitable for:

Af50Af100Af1002