ALDI GARDENLINE GL-CC 36 Li User Manual page 17

Troubleshooting Guide
Fault
Chainsaw does not
work at all
Chainsaw operates
intermittently
Saw chain dry
Chain brake does
not work
Chain/guide rail hot
Chainsaw
juddering,
vibrating or not
sawing properly
AFTER SALES SUPPORT
1300 922 271
Possible Causes
Quick stop brake has been
triggered
No power
Loose connection (external)
Loose connection (internal)
ON/OFF switch defective
No oil in the tank
Oil tank cap breather blocked
Oil outlet blocked
Problem with the switch
mechanism in the front hand guard
No oil in the tank
Oil tank cap breather blocked
Oil outlet blocked
Blunt chain
Chain tension too loose
Blunt chain
Worn chain
Saw teeth pointing in the wrong
direction
service.australia@isc-gmbh.info
Remedy
Pull the hand protection back to
the normal position.
Check charge level of battery
Call 1300 922 271
Call 1300 922 271
Call 1300 922 271
Fill up with oil.
Clean the oil tank cap.
Clear the oil outlet.
Call 1300 922 271
Fill up with oil.
Clean the oil tank cap.
Clear the oil outlet
Re-sharpen or replace the chain.
Tighten the chain
Re-sharpen or replace the chain.
Replace the chain.
Reinstall the saw chain with
the teeth facing in the correct
direction.
MODEL NUMBER: GL-CC 36 Li, 02/14
17
12