WEIDER CLUB C670 User Manual page 9

10. Press two 25mm Square Inner Caps (28) into a
Pad Tube (27). Slide the Pad Tube into a hole in
the Leg Lever (5). Slide two Foam Pads (26) onto
the Pad Tube.
Assemble the other Pad Tube (27) in the same
manner.
11. Press a 45mm Square Inner Cap (12) into the
bottom of the Curl Post (8).
Attach the Curl Pad (9) to the Curl Post (8) with
two M6 x 16mm Screws (29).
12. Attach a Large Base Cap (70) to the Left Base
(40) with two M4 x 16mm Screws (36). Attach
another Large Base Cap to the other end of
the Left Base in the same manner.
Attach the Left Base (40) to the Center Base (39)
with two M10 x 78mm Bolts (32) and two M10
Nylon Locknuts (34). Do not tighten the
Locknuts yet.
Repeat this step with the Right Base (not
shown).
Insert two M10 x 75m Carriage Bolts (90) up
through the Center Base (39).
10
5
27
26
28
11
9
12
90
70
40
36
9
27
26
28
8
29
12
39
32
34
70