Siemens KF 86N Series Installation Instructions And Instructions For Use page 7

Aligning the appliance
Caution!
To avoid damage to the floor, always move the
■
appliance with the height-adjustable feet screwed
upwards.
The two front height-adjustable feet must always be
■
in contact with the floor to avoid the appliance from
rolling or tipping when the door is opened.
Rollers are located under the appliance for easy
movement and alignment:
Place the appliance vertically on a firm, level floor.
1.
Using a wrench, screw down both of the front height-
2.
adjustable feet so that they touch the floor.
Compensate for floor unevenness with the front
3.
height-adjustable feet.
To align, use a spirit level.
Note:
13
Align refrigerator compartment doors
Align the vertical gap of the doors:
Remove the contents of the doors, if present.
Note:
Remove the screw T20 and cap on the door hinge.
1.
Installation and connection
Loosen the safety screw.
2.
Caution!
Do not remove the safety screw.
With the door closed, turn the adjustment screw until
3.
the desired position is reached.
– To move the upper end of the door outwards, turn
clockwise.
– To move the upper end of the door inwards, turn
anticlockwise.
To check the position, close the door and correct if
4.
necessary.
Tighten the safety screw again.
5.
Fit the cap and screw in the screw T20 again.
6.
en
7