Internet Connection Setup; Use Standard Tcp/Ip Properties For Dhcp; Log In To Web Manager - TECHVIEW wilink R300T User Manual

4. When connected, log in to Web manager to set up Internet connection.

2.3 Internet Connection Setup

Before you start the setup process, get your ISP information and make sure
the computers and devices in the network have the settings described here.

2.3.1 Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, change the settings
so that it uses Dynamic Host Configuration Protocol (DHCP)
clear about this configuration, please refer to
.
IP
.

2.3.2 Log in to Web Manager

1. 1). Launch a web browser; in the address bar, input 192.168.0.1 and
press Enter;
2). Enter admin in the password field on the appearing login window and
then click OK.
Appendix 1: How to Configure
7
.
If you are not