Secuvox KC212M Manual

Overview

1: Operation button
4: Video indicator (blue) 5: Power switch
7: USB Port
10: Mode switch (it is the Video / Photo selection switch. Up for Photo / Down for
Video)

Introduction

This video recorder is the first Mini CamCorder with a high-definition video recording
supports a Micro SD Card. It can take both photos and video. With simple operation, elegant
design, small size, it is easy to carry. It is an essential utility in business, education, security,
media, justice, tourism, health care. Charge the battery fully before use and with the first 5
charges, charge battery fully to maintain the maximum battery capacity.

Quick Start

a. Turn on: Set Power switch (5) to "ON" and press the Operation button (1) for 2
seconds to turn on the device. The green light (3) and blue light (4) will be on.
b. Turn off: In any status, directly set the power switch to "OFF" will immediately turn
off the device and current video file will not be saved.
C. Take photo: In the photo-taking mode (push switch UP), press button (1) to enter
into the standby status for photo-taking, and green light is on, after 2 seconds the
red light will be on automatically, it means the device is ready for taking photo. Press
the button (1). The red light blinks once to take a photo and save to device. Then it
2: photo indicator (red)
8: Built-in camera
Video - photo
3: power indicator (green)
6: MicroSD card slot
(Card not included)
9: MIC