Advertisement

Ninja BB Installation Instructions

IMPORTANT NOTICE:

BEFORE RIDING:
your local TOKEN dealer for service or replacement.
improperly attached cranks.
AFTER RIDING:
prematurely.

WARRANTY:

All TOKEN products are guaranteed against defects in materials or workmanship for two (2) years from the original date of purchase. This warranty applies to the original owner only and is
not transferable. The warranty is considered void if resold. The warranty does not cover normal wear and tear or damage from abuse. Please see our website or contact your local dealer or
distributor for more details.
2
4
MODEL:
TF46BR24
TF46BR24-TBT
No.
Description
Right Cup
1
Left Cup
2
0.2mm Spacer
4
5
24mm Side Cover
6
24mm Side Cover
MODEL:
TF46BRGXP
TF46BRGXP-TBT
Description
No.
Right Cup
1
Left Cup
2
0.2mm Spacer
4
5
24mm Side Cover
6
22mm Side Cover
7
24mm Wave Washer
3
4
1

SHIMANO CRANKSET (ROAD ONLY)

5
Q'ty
1
1
2
1
1
Step 4
Step 1-3

SRAM GXP CRANKSET (DOUBLE ROAD ONLY)

6
Q'ty
1
1
2
1
1
1
Step 4
Step 1-3
Step 1
Apply thin layer of grease to adaptors and threads.
Step 2
Thread the
by hand until the BB cups touch the bottom bracket shell.
Step 3
Use a torque wrench with the
to tighten to 25-30 N.m (221-266 in-lb)
Step 4
Install any necessary adaptor, according to this manual.
Note:
We recommend using
easier installation, and to prevent any frame damage.
If the bottom bracket cup can be pressed into the frame BB shell by
hand easily, the BB shell may be oversized and "#C3" cups or
adapters (sold separately) may be required. Contact us or your local
dealer for more information.
4
2
79mm
Non-Drive
Side
4
2
79mm
Non-Drive
Side
1
drive side cup clockwise into the
3
BB Installation Tool (sold separately)
BB Installation Tool (sold separately) for
3
www.tokenproducts.com
1
4
Drive Side
1
4
Drive Side
2
non-drive side cup
6
Step 4
5
7
Step 4
2019-Jan.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ninja BB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Token Ninja BB

  • Page 1 WARRANTY: All TOKEN products are guaranteed against defects in materials or workmanship for two (2) years from the original date of purchase. This warranty applies to the original owner only and is not transferable. The warranty is considered void if resold. The warranty does not cover normal wear and tear or damage from abuse. Please see our website or contact your local dealer or distributor for more details.
  • Page 2 www.tokenproducts.com FSA BB386 CRANKSET MODEL: TF46BR386 TF46BR386-TBT Description Q'ty Right Cup Left Cup 0.2mm Spacer 30mm Side Cover 79mm Conical Spacer 30mmWave Washer Non-Drive Drive Side Step 4 Step 1-3 Step 4 Side ROTOR BB386 CRANKSET MODEL: TF46BR386 TF46BR386-TBT Description Q'ty Right Cup Left Cup...

Table of Contents