Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Angler LEDSB-1818
- Page 1 Collapsible LED Softbox LEDSB-1818 For 1 × 1 LED Lights INSTRUCTIONS...
- Page 2 Overview Securing straps Notches Corner straps Adjustable corners Recessed touch-connect strip Carry bag Diffuser...
- Page 3 Attaching the Softbox Preparing the Light Fixture If the fixture has height adjustment knobs, raise the fixture’s height so it sits above the bottom of the yoke. Some 1 × 1 fixtures have two sets of side knobs for tilt and height adjustment.
- Page 4 Fit the top of the softbox over the fixture’s top rim, and attach the upper strap across the back of the light. Fit the bottom of the softbox over the fixture’s bottom rim, and attach the lower strap. Fit the corners over the fixture, and close the adjustable corners so the fit is snug.
- Page 5 Attach the diffuser to the innermost edge of the recessed touch-connect strip . Make sure to leave enough room for a grid. Angler LEDSBG-1818 LED Grid for the LEDSB-1818 Softbox (sold separately) The accessory grid narrows the beam spread and controls light spill. Attach...
- Page 6 Warnings Please read and follow these instructions, and keep this manual in a safe place. For use only with LED fixtures. Use caution when unfolding this product. Unfold in an area large enough to accommodate the full size of the softbox. Do not unfold around breakable objects.
- Page 7 One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s...
- Page 8 anglerlights.com...
Need help?
Do you have a question about the LEDSB-1818 and is the answer not in the manual?
Questions and answers