Advertisement
ASSEMBLY
1. Attach the Spring Tine (#17) to the Frame (#8) by using the Round Head Bolt M8x20 (#16), Hex Nut
M8 (#6) and Lock Washer Ø8 (#7), then tighten.
2. Attach the Lift Handle (#1) to the Frame (#8) by using the Hex Bolt M5x30 (#5) and Hex Nut M5
(#15), then tighten.
3. Attach the Adjusting Rod (#4) to the Frame (#8) by using the Hex Bolt M8x25 (#3), Hex Nut M8 (#6)
and Lock Washer Ø8 (#7), then tighten.
4. Attach the Adjusting Frame (#14) to the Frame (#8) by using Pin (#9) and Hair Cotter Pin Ø3 (#10).
5. Insert the Plastic Cap (#18) to the Adjusting Frame (#14).
6. Attach the Connector (#11) to the Bracket (#12) by using the Hex Bolt M8x45 (#13), Hex Nut M8
(#6) and Lock Washer Ø8 (#7), then tighten.
7. Attach the Connector (#11) to the Bracket (#12) by using Pin (#9) and Hair Cotter Pin Ø3 (#10).
8. Connect the Adjusting Steel Block (#2) with the Adjusting Rod (#4), adjust them for working depth.
9. The Hex Bolt M8x25 (#3), Hex Nut M8 (#6) and Lock Washer Ø8 (#7) will use for connecting the
rake.
PARTS LIST
Part #
Description
1
Lift Handle
2
Adjusting Steel Block
3
Hex Bolt M8x25
4
Adjusting Rod
5
Hex Bolt M5x30
6
Hex Nut M8
7
Lock Washer Ø8
8
Frame
9
Pin
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
QTY
Part #
1
10
1
11
6
12
1
13
1
14
22
15
22
16
1
17
2
18
November 2019 Version 5
Description
Hair Cotter Pin Ø3
Connector
Bracket
Hex Bolt M8x45
Adjusting Frame
Hex Nut M5
Round Head Bolt M8x20
Spring Tine
Plastic Cap
QTY
2
1
1
2
1
1
15
15
1
Seite 3
Advertisement
