Motorola AVIGILON ACC VMA-RPO-4P2 User Manual page 11

10. Select how the appliance obtains IP addresses from the network. On the navigation sidebar, click
Network to open the Network panel. For each network port used, select Automatic or manually enter
the settings.
For more information, see
11. If a laptop was used to configure the device:
a. Connect an Ethernet cable from the device to the corporate network port.
b. Disconnect the configuring laptop from the camera network port.
12. Connect the cameras to the PoE ports.
For more information about the Web Interface, see
You are now ready to install the ACC Client software and connect the ACC ES HD Recorder to an ACC site.
You can then configure the device and cameras for daily operation through the AvigilonControl Center
Client software. For more information, see
Starting the ACC ES HD Recorder for the First Time
Connecting the Device to Users and Cameras on
Configuring the Recorder on page 8
Connecting to ACC Software and ACS on
page 13.
page 17.
7