Lyman Pro-Touch 1500 Operating Instructions

Cleaning & Troubleshooting:
To clean any loose powder from the scale, follow the procedure outlined
below.
1. Turn off scale and remove powder pan from platform.
2. Brush away or blow off any loose powder around platform. This should
be a sufficient cleaning for typical usage of the scale.
If having problems zeroing or if scale is not operating properly, a more thor-
ough cleaning of the scale may be required by following the steps outlined
below. Please note that this type of cleaning IS NOT required after every
use of the scale.
1. Turn off scale and remove powder pan from platform.
2. Gently remove the silver platform off the load cell. Remove the platform
from the load cell by pulling straight up on the platform.
NOTE: The raised ring under the platform is to prevent powder from falling
down onto the load cell and disrupting operation.
3. Brush away or blow off any powder that may have been trapped under
the platform. Take care in doing this as to not brush / blow any powder
down into the exposed load cell.
4. Replace platform by pushing it straight down onto the load cell until it fully
seats.
5. Cleaning is complete at this point. BE SURE TO RE-CALIBRATE AND
RE-ZERO SCALE BEFORE CONTINUED USE!
The scale body and cover may be cleaned with a paper towel dampened
with window cleaner. This will help remove any static charge that may be
present. The scale should be cleaned in this manner if any static charge is
noted.

Limited Warranty

Lyman Products Corp. warrants to the original retail purchaser of this scale
for a period of one year from the date of purchase that the scale is free
from defects in materials and workmanship. A defective scale returned post-
age-paid by the purchaser to Lyman Products Corp. with dated sales receipt
within the one year period will be repaired or replaced free of charge, provid-
ed that the returned product has not been subject to abuse, unreasonable
use, tampering, neglect or excessive wear. Please include a description of
the alleged defect.
For questions please contact Lyman Customer Service toll free at
1-800-22 LYMAN
(Foreign customers may call 1-860-632-2020)
www.lymanproducts.com
Lyman
475 Smith Street
Middletown, CT 06457
®
Rev. 02/19
Lyman
Pro-Touch
Electronic Reloading Scale
Operating
Instructions
®
1500
TM