INTRODUCTION
Thank you for deciding to purchase the Kettle Tipper/Stability Base from Aidapt.
The Kettle Tipper/Stability Base are manufactured from the finest materials and
components available. When used correctly they are designed to give many years
of reliable trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
Food preparation board for those with limited hand use.
INSTRUCTIONS FOR USE
NB: When using the Tipper with a cordless kettle, for extra safety we
recommend that a Tipper Stability Base (VM984) is used.
Using the Kettle Tipper is simple:
If using the Stabiliser Base, position the Kettle Tipper on the Base before
•
use and ensure that the unit clicks into place.
The Tipper is designed to carry any type of kettle or teapot. It allows the
•
user to pour boiling water with control and without carrying the weight of
the kettle.
Place the kettle or teapot on the Tipper and secure with the Velcro
•
Fill kettle by carrying water to the kettle with a jug.
•
Tip hot water carefully.
•
CLEANING
Clean your Kettle Tipper and Stabiliser Base using a non-abrasive cleaner or mild
detergent with a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning
pads may damage the product beyond repair and should not be used. Always
ensure that you wipe dry the equipment after cleaning.
Usage and Maintenance Instructions
2
©
strap.
Ver. 2 08/2012 (2126)