Advertisement
Assembly/Operating Continued
Attaching the Canopy:
1
2
The CANOPY is stored inside out.
Lay CANOPY on a flat surface with
bottom of MIDDLE HINGE facing UP.
3
4
Push MIDDLE HINGE down towards
Grab each end of CANOPY ARMS and
the floor and until CANOPY is inverted.
pull towards you until full extended at
each corner.
5
Insert the four CANOPY POSTS into
COT FRAME CORNERS making sure
the LOGO of the CANOPY is on the
same side as the STORAGE POCKET.
3
Advertisement
