Summary of Contents for Igel UD
- Page 1 Connecting Your IGEL Device • Connecting Your IGEL UD Device (see page 2) • Booting from UD Pocket (see page 5) Connecting Your IGEL Device 1 / 6...
- Page 2 Connecting Your IGEL Device Connecting Your IGEL UD Device You have opened your IGEL package, see Unpacking Your IGEL Universal Desktop Package, and want to connect your device. Attach the foot stand to the device, using the screw/s found on the bottom of the foot stand.
- Page 3 Connecting Your IGEL Device One hand screw: Connecting Your IGEL Device 3 / 6...
- Page 4 Connecting Your IGEL Device 2. Connect the plugs as shown in the picture below. (Example with a UD3) Depending on the device, the plugs may be arranged differently, see e.g. UD2 M250C, UD2 D220, UD3 M340C, UD6 H830C, UD7 H850C.
- Page 5 While the device is booting, try pressing [F12] (in general), [F10] (Intel devices), or [F9] (Hewlett-Packard devices) in order to access a list of boot devices and select UD Pocket. If the above does not work, access the BIOS settings via pressing [Del], [F1] or [F2] during boot and activate booting from USB storage media and/or change the boot order.
- Page 6 The device boots into UD Pocket and the Setup Assistant starts. Do not remove UD Pocket from the computer until you have shut down the IGEL OS contained on it. Otherwise, you can damage the operating system on UD Pocket and lose your settings as well as data on other removable media.