Using Further Nozzles (Accessories) - Royal Appliance International Dirt Devil M7110 Operating Manual

02_M7110_gb.book Seite 26 Freitag, 10. Oktober 2008 10:17 10
2 Unpacking and assembling
2.3 Using further nozzles
(accessories)
5
6
1 2
7
26
Besides the floor nozzle you just attached, you may extend
the functions of your cylinder vacuum cleaner with other
nozzles.
The supplied accessories include:
- Crevice nozzle (Fig. 5/1)
For vacuuming spots difficult to reach.
- Furniture brush (Fig. 5/2)
For cleaning delicate surfaces.
- Upholstery nozzle (Fig. 5/3)
For gentle vacuuming of upholstered furniture.
Optionally available are:
- Turbo brush (Fig. 6/1)
This is equipped with a rotating brush head and is
thus ideally suited for the thorough deep cleaning of
carpets.
NOTE:
The brush rotating at high speed makes a loud noise
during operation.
- Parquet brush (Fig. 6/2)
This has long bristles making it especially suitable for
cleaning delicate surfaces (e.g. parquet and laminate
floors)
Proceed as follows to attach the nozzles:
WARNING:
Danger of injury! Only assemble the appliance if it is not
connected to the power supply. Otherwise the machine
might start up and parts of your body, hair or pieces of
clothing might be sucked in.
ATTENTION:
Use only intact nozzles. Damaged nozzles may scratch
or damage surfaces and objects.
1. Switch the appliance off and pull the plug out of the
socket.
2. Pull the attached nozzle off of the telescopic tube.
3. Put the desired nozzle onto the bottom end of the
telescopic tube (Fig. 7/1) or if necessary directly onto
the handle.
ATTENTION:
Using the cylinder vacuum cleaner without a nozzle
attached increases the danger of accidentally sucking in
objects.