Functions ............20 Setting the time and time format ....36 Data storage ............. 22 Downloading and installing the Modes ..............22 Crane Connect app .......... 37 Time mode ............23 Creating a user account ........38 Step counter mode .......... 24...
Page 3
Connecting the wristband with the Crane Connect app ..........39 Using the wristband without the Crane Connect app ..........42 Activating sleep mode ........43 Deactivating sleep mode .......44 Resetting the wristband ........44 Care and maintenance ........46 Cleaning the wristband ........46 Storing the wristband ........47 Troubleshooting ..........48...
QR Codes QR Codes Try it out now Just scan the QR code with your smartphone and find out more about the ALDI product you have purchased. Depending on your tariff plan you may be charged for the connection.
General information General information Reading and storing the instruction manual This instruction manual accompanies the wireless activity tracker (referred to below only as the “wristband”). It contains important information on start-up and use. Before using the wristband, read the instruction manual carefully. This particularly applies for the safety notes.
General information Explanation of symbols The following symbols and signal words are used in this instruction manual, on the wristband or on the packaging. WARNING! This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided.
Page 10
General information NOTICE! This signal word warns against potential damage to property. This symbol provides you with useful supplementary information on assembly or operation. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the European Economic Area.
The wristband is exclusively designed for measuring your activity and sleeping habits. It is designed for collecting data for analysis with the Crane Connect app. You can use this data to help you reach your goals in terms of fitness, level of activity and sleep.
Safety improper and may result in damage to property or even personal injury. The manufacturer or vendor accepts no liability for damage caused by improper or incorrect use. Safety notes WARNING! Danger of suffocation! Small children or animals may choke on the display module if swallowed. −...
Page 13
Safety WARNING! Risk of injury! Incorrect operation may result in severe injury. − If you have a pacemaker, be absolutely sure to ask your physician before using the wristband for the first time.
Page 14
Safety WARNING! Danger of explosion! Rechargeable batteries may explode if they are excessively heated up. − Do not heat up the display module. − Keep the wristband away from hot surfaces. − Do not throw the display module in an open fire. −...
Page 15
Safety WARNING! Danger for children and persons with impaired physical, sensory or mental capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowl- edge (e.g. older children). − This wristband may be used by children ages eight and over as well as per- sons with impaired physical, sensory or mental capacities or those lacking experience and knowledge if they are supervised or have been instructed in how to safely use the wristband and have understood the risks associat-...
Page 16
Safety and user maintenance must not be performed by children unless they are at least eight or more years of age and under supervision. WARNING! Risk of chemical burns from battery acid! Leaking battery acid may lead to chemical burns. −...
Page 17
Safety CAUTION! Risk of injury! Incorrect operation may result in injury. − Do not use the wristband if it exhibits visible damages. − Do not open the housing of the display module and have qualified professionals perform repairs. Liability and warranty claims are waived in the event of repairs performed by the user or incorrect use.
Page 18
Safety NOTICE! Risk of damage! Improper handling of the wristband may result in damage. − Keep sharp objects away from the wristband. − Store the wristband so that there is no risk of it falling into a tub or sink. −...
Checking the wristband and product contents − You can use the wristband at ambient temperatures between –10 °C and +60° C. − Do not place any objects on the wristband and do not apply pressure to the display. Avoid strong magnetic fields (e.g. transformers). Otherwise, this may cause fluctua- tions in the transmission of the data measured.
Once you reach your goal, the corresponding progress bar will blink and a sound will be emitted. You can set your goals with the Crane Connect app. In order for you to determine the best target value, the Crane Connect app will also specify the indi- vidual limits.
Page 21
• Alarm function The Crane Connect app provides a detailed view for each target value. It provides you with an itemised view of the daily recorded data. The detail view for sleep mode offers the possibility of...
The wristband saves all measured data for seven days. From the 8th to 30th day, only the daily totals will be saved. If during this time you do not connect the wristband with the Crane Connect app, the first record will be overwritten by the last one on the 31st day.
Functions Mode Symbol • Distance mode • Calorie mode • Activity time mode • Sleep mode Time mode Time mode is the first mode that appears on the display module. You can switch to the other modes from this mode. −...
Functions − To switch to step counter mode, push the menu button once. − To switch to distance mode, push the menu button twice. − To switch to calorie mode, push the menu button three times. − To switch to activity time mode, push the menu button four times. −...
Functions as a factory default. You can use the Crane Connect app to switch the acoustic signal on and off and change the daily target. At 12 midnight, the step counter will automatically reset to zero. If the wristband is in sleep mode, the wristband will not count the steps you cover.
Page 26
By factory default, a daily target of 3.5 miles has been set. You can use the Crane Connect app to change this setting.
A daily target of 3,000 calories is set as a factory default. You can use the Crane Connect app to switch the acoustic signal on and off and change the daily target. You can determine the number of calories burned directly on your wristband or via the Crane Connect app.
Crane Connect app provides you with an analysis of your sleep cycles and quality. Alarm function You can use the Crane Connect app to set an alarm function. Overall, you can set up to three...
Compatible Bluetooth® devices The following devices with Bluetooth® (from Bluetooth® 4.0) are compatible with the wristband and the Crane Connect app: • Apple® iPhone® 4s and more recent versions • Apple® iPad® 3rd generation and more recent versions •...
Functions You can find a complete list of supported devices online at www.cranesportsconnect.com/compatibility. Watertightness The following table will tell you in what situation the wristband is waterproof up to 3 bar. Situation Watertight to 3 bar* Rain splashes...
Page 31
Functions Situation Watertight to 3 bar* Washing hands (splash water) Showering Bathing/swimming Water sports (e.g. diving) *The specification of bar refers to the air overpressure used in connection with the watertight- ness test for the wristband in accordance with DIN 8310.
Operation Operation Activating the display module − To activate the display module, hold down the menu button for two seconds – or four seconds if you are switching on the display module for the fi rst time. “How are you?” will appear on the display. The wristband must be switched on once before you can charge the rechargeable battery.
Page 33
Operation The charge status is indicated using the following symbols: Symbol Charge status 78–100 % 56–77 % 33–55 % 11–32 % 0–10 %...
Page 34
Operation − To determine if the rechargeable battery is completely empty, push the menu button. icon will appear on the display for three seconds. To charge the rechargeable battery: (see Fig. B) or the clip 1. Take the display module out of the band 2.
Operation Inserting the display module − Push the display module into the band or the clip so that it is secure and cannot fall out. You have successfully assembled the wristband and can now use it. Putting on the wristband⁄clip We recommend that you do not wear the wristband on your dominant hand.
2. Once “Off?” has appeared, push the menu button to switch the display module off. Setting the time and time format Time mode indicates the current time. This is automatically adopted by the Crane Connect app. You can set the time to 24 h or 12 h format in the app.
Operation Downloading and installing the Crane Connect app If you would like to use the wristband in combination with the Crane Connect app, you must download the Crane Connect app and install it on your smartphone for example. − Download the free Crane Connect app from the App Store or Google Play Store at https://www.cranesportsconnect.com under the “Download”...
− Install the Crane Connect app on your smartphone. Follow the step-by-step instructions for this. Creating a user account To create a user account with the Crane Connect app, proceed as follows: 1. Start the Crane Connect app. 2. Follow the registration instructions step by step.
Operation Follow the subsequent instructions from the Crane Connect app step by step. 5. Once you have finished with the user settings, return to the “All Settings” menu. You can also create new users on the website www.cranesportsconnect.com. Connecting the wristband with the Crane Connect app...
Page 40
Operation 1. Once the user settings are complete, return to the “All Settings” menu. 2. Select the icon “Activity Tracker”. You now edit additional settings of the wristband. 3. To connect the wristband with your smartphone, select “Connect” in the “Pairing” field. A noti- fication window will appear.
Page 41
7. From there, you can access all the analyses of your measured data via the “Activity Tracker” icon. As soon as you have connected the wristband with the Crane Connect app, all recorded data will be transferred to it. If the Internet connection on your smartphone is active, the Crane Connect app will automatically upload all data measured to the website www.cranesportsconnect.com for permanent storage.
Using the wristband without the Crane Connect app You can also use the wristband without the Crane Connect app. In the process, keep in mind that the personal data of an average user is used to determine the calories burned and the distance.
2. Push the menu button again to activate sleep mode. icon will appear on the display. Sleep mode has now been activated. The duration and quality of your sleep will now be recorded. You can view the data collected via the Crane Connect app.
Operation If you push the menu button now, the current time will appear on the display. Deactivating sleep mode 1. After waking up, hold down the menu button for approx. two seconds. “Wake?” will appear on the display. 2. Push the menu button to end sleep mode. icon followed by the duration of your last sleep will briefly appear on the display.
Page 45
Operation of the display module .The wristband will be reset to the factory defaults. If the wristband is connected to the app, you can also reset to factory defaults via the app. To do so, go to the wrist- band settings.
Care and maintenance Care and maintenance Cleaning the wristband NOTICE! Risk of damage! Improperly cleaning may lead to damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning utensils such as knives, hard scrapers and the like.
Care and maintenance − Wipe the display module off with a soft, damp (if necessary), lint-free cloth. − Let the band and display module air dry completely before storing them. Storing the wristband NOTICE! Risk of damage! Improper handling of the wristband may result in damage. −...
Use the following information and the FAQs (frequently asked questions) on our website to rectify faults yourself: www.cranesportsconnect.com/faq.php Fault Solution Not all of the data measured were If you have not synchronised with the Crane Connect transferred. app in the last 30 days, the data measured prior to then will be overwritten.
Page 49
− Then restart the connection process with your wristband. − Switch your smartphone off and then back on. − Activate the visibility of your smartphone in the Bluetooth® menu. − Reinstall the Crane Connect app on your smart- phone.
Krippl-Watches hereby declares that the Wireless Activity Tracker (model no. AE7-CDAT- 6A/6B/6C/6D/6E) complies with the fundamental requirements and other applicable provisions of the R&TTE 1999/5/EC and RoHS 2011/65/EU directives. You can access the full declaration of conformity on our website: www.produktservice.info AE7-CDAT-6A EAN: 20039691 AE7-CDAT-6B EAN: 20039707 AE7-CDAT-6C EAN: 20039714...
Technical data AE7-CDAT-6D EAN: 20039721 AE7-CDAT-6E EAN: 20039738 Technical data Wristband Model no.: AE7-CDAT-6A/6B/6C/6D/6E Article number: 93932 Operating temperature: –10 °C to +60 °C Storage temperature: –20 °C to +70 °C Length of the wristband: approx. 27 cm...
Disposal Rechargeable battery Type: Lithium polymer rechargeable battery Capacity: 50 mAh Voltage: 3.7 V Disposal Disposal of packaging Dispose of the packaging sorted according to type. Dispose of cardboard with waste paper recycling and leave films with your recyclables collection point.
Disposal Disposing of the wristband (Applicable in the European Union and other European countries with established systems for separated collection of recyclables.) Waste equipment must not be disposed of together with domestic waste! This symbol indicates that disposing of this product together with domestic waste is prohibited under the directive on waste electrical and electronic equipment (2012/19/ EU) and national laws.
Page 54
Disposal contribute to an effective usage of natural resources. Information on waste equipment collection points can be obtained at your local authorities, public bodies responsible for waste manage- ment, an authorised body responsible for the disposal of waste electrical and electronic equip- ment or your waste collection service.
Page 56
Visit us at www.aldi.com product, please contact us via our helpline support services, details of which are to be found both in this manual and on the product itself. AFTER SALES SUPPORT 93932 00800 52323000 00800 52323000 www.cranesportsconnect.com YEARS MODEL: WARRANTY AE7-CDAT-6A/6B/6C/6D/6E 01/2017...
Need help?
Do you have a question about the AE7-CDAT-6A and is the answer not in the manual?
Questions and answers