Table of Contents
Advertisement
Quick Links
ENGLISH 1-16 / FRANÇAIS 17-31 / ESPAÑOL 32-46
W I N D P R O O F S T O V E
Use & Care
Manual
Safety ..................................3
Assembly ............................4
Operation ............................8
Ignition ..............................11
Transport ..........................12
Maintenance .....................12
Warranty ............................14
Trouble Shooting ..............15
Parts Listing ......................16
Assembly Diagram ...........16
ANSI Z21.72-2011
CSA 11.2-2011
MODEL #: 8202-54Z
ZIPPO MODEL #: 44026
PLEASE RECORD YOUR SERIAL NUMBER, LOCATED INSIDE LID OF
WINDPROOF STOVE, AND THE DATE OF PURCHASE BELOW.
SERIAL NUMBER ______________________________________________
DATE OF PURCHASE ___________________________________________
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT INFORMATION
NECESSARY FOR THE PROPER ASSEMBLY AND SAFE USE OF THE
APPLIANCE. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS
BEFORE ASSEMBLING AND USING THE APPLIANCE. FOLLOW ALL
WARNINGS AND INSTRUCTIONS WHEN USING THE APPLIANCE.
READ AND SAVE THESE INSTRUCTIONS
TM
YEAR LIMITED
GUARANTEE
Zippo Manufacturing Company
33 Barbour Street,
Bradford, Pennsylvania 16701 USA
Telephone: 888-368-0826
Customer Care Website: zippo.com
Assembled in USA with domestic
and foreign components.
843712_rA
Advertisement
Table of Contents
Summary of Contents for Zippo 44026
-
Page 1: Table Of Contents
YEAR LIMITED GUARANTEE ANSI Z21.72-2011 CSA 11.2-2011 MODEL #: 8202-54Z ZIPPO MODEL #: 44026 PLEASE RECORD YOUR SERIAL NUMBER, LOCATED INSIDE LID OF Zippo Manufacturing Company WINDPROOF STOVE, AND THE DATE OF PURCHASE BELOW. 33 Barbour Street, SERIAL NUMBER ______________________________________________... -
Page 3: Safety
• This stove is a combustion appliance. All combustion concerning assembly or operation, consult your dealer, gas appliances produce carbon monoxide (CO) during the appliance serviceman, your gas company or Zippo Consumer combustion process. This product is designed to produce Relations at 888-368-0826. -
Page 4: Assembly
• Use as a cooking appliance only. Never alter in any way or local ordinances and codes or with ANSI/NFPA 58. Turn off use with any device or part not expressly approved by Zippo propane when not in use Manufacturing Company. - Page 7 Free Standing Mode For Optional Leg Assembly...
-
Page 8: Operation
2. Be sure appliance valves are shut off as shown in figure 4. This windproof stove accommodates these cylinder sizes, not included. Large Propane Cylinder Small Propane Cylinder • connect with Zippo • direct connection accessory adaptor hose only figure 4 3. - Page 9 6. Inspect hose before each use of the stove. If the hose is cracked, cut, abraded or damaged in any way, the appliance must not be operated. 7. For repair or replacement of hose/regulator assembly, contact Zippo Consumer Relations at 888-368-0826. figure 10...
- Page 10 Disconnected cylinders must have a dust cap installed. Large Propane Cylinders must not be stored in a building, PROPANE CYLINDER garage or any other enclosed area. 4. Keep out of the reach of children. The Propane Cylinder is not included with the Zippo Windproof ® Stove ™...
-
Page 11: Ignition
(Step 5). 1. Turn control knob to off. Wait 5 minutes, then try again. 9. If the leak persists, contact Zippo Consumer Relations at 888-368-0826 for assistance. Do not attempt to operate 2. If the burner-venturi will not light, consult “Trouble Shooting appliance if a leak is present. -
Page 12: Transport
MAINTENANCE SHUT DOWN Direct Connection (Small Propane Cylinder) CAUTION 1. Turn control knobs to off. 2. Remove propane cylinder and place protective cap back • CAUTION HOT SURFACES on cylinder. • Let the stove cool completely before cleaning, maintenance, 3. Remove regulator by pulling quick connect coupler back until storage or transportation. - Page 13 figure 20 figure 24 Install burner screws and reconnect ignitor wires to ignitor electrodes. Remove the burner-venturi assembly from the stove. figure 25 figure 21 Clean the burner-venturi assembly with a pipe cleaner or burner-venturi cleaning tool. Replace wind shields, wire grate, and lid. figure 22 Replace the burner-venturi assembly, making sure that the burner-venturi tube is correctly aligned with the screw holes...
-
Page 14: Warranty
Stove Parts must always be used ® ™ for replacement. Use of any other parts will automatically nullify the above warranty. Contact Zippo Consumer Relations at 888-368-0826 for repairs or replacement parts. To ensure optimum performance, use only genuine Zippo Windproof ®... -
Page 15: Trouble Shooting
Leak detected at cylinder, 1. Regulator fitting loose. 1. Tighten fitting and “Leak Test Section”. regulator or other 2. Gas leak in hose/regulator or control valves. 2. Contact Zippo Consumer Relations at connection. 888-368-0826. Flame flashback beneath 1. Burner-Venturi blocked. -
Page 16: Parts Listing
ITEM NO. PART NUMBER DESCRIPTION DESCRIPTION DESCRIPCION 36010-E201 COUVERCLE TAPA 37020-E201 BASE BASE BASE 36015-244 LID STRAP COUVERCLE - BANDE TAPA - TIRA 34400-138A HANDLE POIGNEE MANGO 30225-181 WIRE GRATE GRILLE DE FILE MALLA DE ALAMBRE 35489-114 WIND SHIELD PARE-BRISE PARABRISAS 33909-24 BURNER...