1. Manuals
  2. Brands
  3. Atomix Timepiece Manuals
  4. Watch
  5. 87177
  6. Instruction manual

Atomix Timepiece 87177 Instruction Manual

Solar power dd usa-euro multi-bands 3-hands radio controlled ana-digit watch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USA-EURO multi-bands 3-Hands Radio Controlled Ana-Digit Watch
Main Features:
1. Solar Powered
2. Automatic Radio Controlled Time Setting for USA (WWVB), Germany (DCF), UK
(MSF), and Japan (JJY 60Khz only)
3. Time Zone setting by 31 major City names
4. 3 Levels Signal strength indicator
5. Reception success and failure indicator
6. LCD reading selection for:
Day of the week or
Date & Month or
Second or
Battery level
7. Dual Language selection between English and German for Day
8. Watch hands reset (LCD shows RST)
9. Rechargeable Battery
10. Battery level indicator
11. Around 3 months battery life when the battery is fully charged
Instruction Manual
Solar Power DD
(2 Buttons)
IM code: SLRADD9D4
Date: MAY-2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 87177 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atomix Timepiece 87177

  • Page 1 Instruction Manual Solar Power DD USA-EURO multi-bands 3-Hands Radio Controlled Ana-Digit Watch IM code: SLRADD9D4 Date: MAY-2009 (2 Buttons) Main Features: 1. Solar Powered 2. Automatic Radio Controlled Time Setting for USA (WWVB), Germany (DCF), UK (MSF), and Japan (JJY 60Khz only) 3.

  • Page 2: Battery Management

    Battery management When Battery level is low, the LCD shows a flashing empty battery icon and the seconds hand runs 2 steps every 2 seconds. When this is the case, all button functions and signal reception will be prohibited. If battery is not charge up in time, the hands stop to save battery power at 12 o’clock.

  • Page 3: Button Functions

    Caution : The watch should not be overheated or it will be damaged forever. Button Functions: Press and release S1 once to check if the reception was OK or Fail ● Press twice to show the battery level for around 5 seconds ●...

  • Page 4: Time Zone Setting

    3. After reception, the watch will show the time again after the fast running of the minute hand has stopped During signal reception, the LCD display shows the signal-strength. It is good to search a location where signal is the strongest for a good signal reception. Reception Status Check: You can check if the watch was able to pick up signal.
  • Page 5 shows “WAIT” telling you to wait while it is updating the time. The running time varies from 2 to 40 minutes according to your Time Zone setting. Table of Time Zone against 31 major City Name If you travel to country where no Radio Signal is available, your watch will continue to function in the same way as a standard watch.
  • Page 6 Make sure you check the battery level is at least half-full before doing the Time Zone Setting. If the battery level is not half-full, charge up the watch until it reach to this level. English / German language selection: You can select English or German language for the Day on the LCD display. 1.

  • Page 7: Troubleshooting

    TROUBLESHOOTING Second-hand shifting Your watch is a very delicate and precise instrument. Although uncommon, sometimes hard knocks or vibrations can cause the hands to move irregularly, and therefore display the incorrect time, although the internal clock is keeping accurate time. You may notice this if when setting the LCD to “Second”...
  • Page 8 2. Press and holding S2 (lower button) for about 3 seconds until the LCD displays a City name (3 digits City code) then release the button 3. Press-release S2 once after another until the LCD shows a blinking “RST” and then release the button 4.
  • Page 9 Now push the battery spring down. Before you put the case-back on again, make sure the waterproof seal is correctly in place. After Battery Replacement 1. After battery replacement, wait for about 10 minutes until the second hand starts running normally. If the watch hands have been pointing at 12 o’clock before the battery replacement, jump to Step 8.
  • Page 10 5. When the watch is sleeping, the LCD turns off, the hands stops and signal reception is stopped but the internal time is still running. Set the sleep watch to wake up: 1. When the watch is sleeping, pressing any button once to wake up the watch. The LCD displays “WAIT”.

Table of Contents