Advertisement
Table of Contents
LED Personal Task Light -
®
Rail & Non-Rail Mount
#2 PHILLIPS
3/32
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2017 Steelcase Inc.
Grand Rapids, MI 49501
Page 1 of 4
U.S.A.
939501997 Rev B
Printed in U.S.A.
Advertisement
Table of Contents
Summary of Contents for Steelcase LED Personal Task Light Series
- Page 1 Rail & Non-Rail Mount #2 PHILLIPS 3/32 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
- Page 2 ® RAIL MOUNT Set the light into the channel in the desired position. Tighten the knobs until the light is snug on the rail. Connect power supply to light fixture. GENERAL NOTES: Verify power supply that is being plugged into light fixture is 24VDC. Light fixture should use 15W Class II or LPS power supply (24V;...
- Page 3 ® NON-RAIL MOUNT Position the light onto the worksurface in desired location. The shipping spacers will create the desired offset (1/4") to the edge of the worksurface. Clamp the steel strap to the underside of the 1/4" worksurface to allow for single person assembly. Firmly drive the six (6) screws, with a #2 phillips bit, attaching the light to the underside of the worksurface ensuring fixture is snug.
- Page 4 ® REMOVAL OF NON-RAIL MOUNT LIGHT Disconnect power supply. Depress engagement tabs on mounting brackets and slide light until it becomes disengaged (No tools required). Remove screws and shoulder washers. Page 4 of 4 939501997 Rev B...
Need help?
Do you have a question about the LED Personal Task Light Series and is the answer not in the manual?
Questions and answers