Advertisement
ASSEMBLY INSTRUCTIONS
1. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Back Board (A).
2. Affix the Left Side Board (B) to
the Back Board (A) with 3 Wood
Screws (H).
FIGURE 1
3. Align the pilot holes on the Right
Side Board (C) with the through
holes on the Back Board (A).
4. Affix the Right Side Board (C) to
the Back Board (A) with three Wood
Screws (H).
FIGURE 2
5. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Front Board (D).
6. Affix the Left Side Board (B) to
the Front Board (D) with three Wood
Screws (H).
FIGURE 3
7. Align the pilot holes on the Right
Side Board (C)
with the through
holes on the Front Board (D).
8. Affix the Right Side Board (C) to
the Front Board (D) with three Wood
Screws (H).
FIGURE 3
9.
Attach
the
Left
Mounting
Bracket (E) to the Back Board (A)
with the 1" Machine Screw, Washer
and Hex Locking Nut (F).
FIGURE 4
10. Attach the Right Mounting
Bracket (E) to the Back Board (A)
with the 1" Machine Screw, Washer
and Hex Locking Nut (F).
A
B
C
C
A
B
C
A
B
-4-
ATTACHING THE HOPPER/TABLE MOUNT
TO ATTACH THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE
Figure 1
TABLE MOUNT POSITION:
B
1. Set the assembled Hopper on
top of the Apple & Fruit Crusher*
FIGURE 5
2. Attach
the
Bracket to the top foot on the
Apple & Fruit Crusher with the
Figure 2
1½" Machine Screw, two Flat
A
Washers & Hex Locking Nut (G).
FIGURE 6
3. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½" Machine Screw, two Flat
Washers & Hex Locking Nut (G).
Figure 3
D
Figure 4
CAUTION!
.
Left
Mounting
Figure 6
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
-5-
Figure 5
*Apple & Fruit Crusher Sold Separately.
Advertisement
