Summary of Contents for Jamara LiPo Save Audio LED
Page 1
DE - Allgemeines GB - Information Mit dem LiPo Save Audio LED können Sie die Spannung jeder Zelle LiPo Save Audio LED can detect each cell voltage in 2S-4S Lipo Ihres LiPo-Akkus (2 - 4 Zellen) erkennen. Sollte die Spannung einer...
Page 2
General information Da der Firma JAMARA e.K. sowohl eine Kontrolle der Handha- As the company JAMARA e.K. has no influence over the use, main- bung, die Einhaltung der Montage- und Betriebshinweise, so wie tenance or conditions under which our products will operate, we der Einsatz des Produkts und dessen Wartung nicht möglich ist,...
Page 3
DE - Technische Daten GB - Technical data Zellenzahl: 2S - 4S LiPo Battery range: 2S - 4S LiPo Warnspannung 3.0 ~ 3.7 V bei LiPo Akkus Over discharge warning cell voltage: 3.0 ~ 3.7 V for LiPo battery Verzögerungszeit Alarmstart: Delay time when start to warn: 0 sek., 0.5 sek., 1 sek., 1.5 sek., 2 sek., 2.5 sek., 3 sek., 3.5 s 0 sec., 0.5 sec., 1 sec., 1.5 sec., 2 sec., 2.5 sec., 3 sec., 3.5 sec. Alarmdauer: Warning time range: 1 sek., 2 sek., 3 sek., 4 sek., 5 sek., 10 sek., 15 sek., 20 s 1 sec., 2 sec., 3 sec., 4 sec., 5 sec., 10 sec., 15 sec., 20 sec. Messungstoleranz: -10 mV / +10 mV Accurate scope of the warning voltage: Rasterabstand: 2,54 mm...
Page 4
Copyright JAMARA e.K. 2012 Copyright JAMARA e.K. 2012 Notizen | Notice | Note | Notizie | Noticia Kopie und Nachdruck, auch auszugsweise, Copying or reproduction in whole or part, nur mit Genehmigung von JAMARA e. K. only with the expressed permission of JAMARA e.K. 5. Pressing the SET button for 3 seconds again confirm and enter 5. Drücken Sie die SET-Taste länger als 3 Sekunden. Die Alarm LED leuchtet auf. Durch kurzes drücken auf die SET-Taste wird die into warning time set up mode. When large LED ON, press the Alarmdauer eingestellt.