Glasdon NEXUS 100 Operational Instructions

Cup recycling station

Advertisement

NEXUS 100 CUP RECYCLING STATION
Ensure that all personnel read the points listed within this leaflet and that a copy is given to staff involved with
the installation and maintenance of this product. Glasdon recommends that a full Health and Safety analysis
NEXUS 100 CUP RECYCLING STATION

OPENING DOOR / CHECKING FILL LEVEL OF CUP STACKERS

1.
Using the finger lip at the front
of the lid, lift the lid upwards.
®
OPERATIONAL INSTRUCTIONS
is carried out prior to installation.
2.
Lift the lid to the upright position
until the lid is held by the stay
feature.
Tilt the door forward until
the door is held in the open
position.
1 of 4
3.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEXUS 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Glasdon NEXUS 100

  • Page 1 Ensure that all personnel read the points listed within this leaflet and that a copy is given to staff involved with the installation and maintenance of this product. Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.
  • Page 2 REMOVING / EMPTYING THE CUP STACKERS WITH NO BAG Remove each cup stacker from To remove the cups, move the the bar at the rear of the bin quick release 45 degrees to the body. right. REMOVING / EMPTYING THE LIQUID RESERVOIR, WASTE LINER & DRIP TRAY Remove the left side pod lid.
  • Page 3 The door comes complete with a Remove the 8ltr liner for emptying Return the liner and lid to drip tray to collect any spills and and cleaning. complete the emptying is removable for ease of procedure. cleaning. INSERTING A SACK WITHIN THE BIN BODY Lift the lid to the upright position Tilt the door open.
  • Page 4 Refer to steps 15-20 to place a new sack in the NEXUS ARE TRADEMARKS OR REGISTERED TRADEMARKS OF GLASDON GROUP OR ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES A planned maintenance schedule or regular inspection is recommended, replacing components as necessary.

Table of Contents