Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ontech GSM 9030
Summary of Contents for Ontech GSM 9030
- Page 1 Ontech GSM 9030 Users Manual aENGLISHa...
- Page 2 Welcome Thank you for choosing Ontech GSM 9030 We hope that the product will satisfy your needs and that you will find this manual easy to handle and that it guides you in an appropriate way. If you want to learn more, please visit our web site at www.ondico.se, where you can find more information.
-
Page 3: Table Of Contents
Content Overview ..........................5 Content in package ....................... 6 Get started ..........................6 Necessary programming of the SIM card ..................... 6 Optional programming of the SIM card ......................7 Back side, cover removed ............................8 Installation of the unit ............................... 9 Check the SIM card settings .......................... - Page 4 Commands ..................................26 Push button .................................. 27 The lamps ..................................27 The DIP switch................................28 Tip! ............................29 Troubble shooting ....................... 31 Technical specifications ...................... 32 Declaration of conformity ....................33 Declaration of conformity ....................33...
-
Page 5: Overview
Overview Ontech GSM 9030 is a combined remote relay and an alarm caller and is communicating over the GSM network. The cabinet is made for indoor use.. The unit is powered by plugging it into a main power wall socket.. -
Page 6: Content In Package
In the field for telephone number, enter your personal four digit number. This number is the PINCODE you must enter each time you contact your Ontech GSM 9030. Go to ”Optional programming of the SIM card” if you want special functions Turn off the mobile phone and remove the SIM-card. -
Page 7: Optional Programming Of The Sim Card
Optional programming of the SIM card In order to use some of the function you want it can be necessary to program more contacts on the SIM card. See below: NB! To be sure programming is made in a correct way, you can check by requesting an SMS with SIM card settings. -
Page 8: Back Side, Cover Removed
in “DEGREE” or write “2” if you want the alarm when the temperature rises above the alarm temperature. Set active temperature sensor (EXTTEMP) (see page 17). 1) If you have an external temp sensor (optional) and you want it to control the temperature alarm and thermostat you have to activate it.;... -
Page 9: Installation Of The Unit
Installation of the unit Remove the cover door on the back of the unit . Use a small screwdriver.. Install the SIM card (see picture). The upper part of the SIM card holder is moved to left until you hear a click. -
Page 10: Functions
Functions Remote relay With this function you can call the unit or send an SMS and activate or deactivate the 230V/16A relay. Insert the unit in the wall power socket you wish. Put the power contact of the device you want to operate in the power socket of the unit. Control the relay manually You can activate and deactivate the relay by pushing on the button on the front. -
Page 11: Control The Relay With Sms
If this is not desired, please set DIP-switch 8 to position ON. Alarm Ontech GSM 9030 can alarm in many different ways. All alarms are sent as SMS to the telephone numbers on the alarm list (see page 7). This SMS is identical to the status-SMS. -
Page 12: Wired Alarm
Wireless alarm Ondico AB will start to sell different wireless alarm units which communicate with Ontech 9030. Up to 7 different alarm detectors can be connected. The wireless alarm detectors planned are A. Motion detector, B. Magnet switch/Alarm box and C. -
Page 13: Wireless Alarm Detectors
Givare B Wireless alarm detectors Ondico AB will market wireless alarm detectors. These can be easily connected to work together with Ontech GSM 9030. Up to 7 different detectors can be connected. On Ondico website www.ondico.se will inform more about this! -
Page 14: Delayed Activation Of Alarm Detector
The function is deactivated by removing the contact from the SIM card. Turn off/on the alarm function Each time you start up Ontech GSM 9030 the alarm function is turned on 60 seconds after the green lamp has stopped flashing. This delay is because you shall have time enough to move away from the alarm detectors (compare with an ordinary alarm). -
Page 15: When The Unit Is Alarming
Indicates all alarms that have been activated since the last acknowledge. The number indicates the units ID number, Ontech 9030 is always no 1, and the others refer to the extra units ore wireless alarm detectors connected. Note that these inputs not can send an alarm again before the... -
Page 16: Acknowledge An Alarm
(Ontech 9010) connected. An asterisk (*) after the number indicates that the relay is turned on. If Ontech GSM 9030 loose contact with one of the extra relays unit its ID number will not be shown in the SMS. Temp: 24; 24,2 Gives the temperature in degrees C. -
Page 17: Temperatur
Temperatur Temperature sensors Ontech GSM 9030 will by default use the internal temperature sensor for controlling and alarming. The accuracy is +/- 3 degrees C. The internal temperature sensor is also affected by the relay. If the relay is activated it will indicate 1-2 degrees higher than normal, due to heat produced by the relay. - Page 18 The temperature alarm is not activated by default. Activate the temperature alarm as follows: 1) Create a new contact and name it ”TEMP”. In the telephone number field write ”1” if you want an alarm if the temperature drops below 5 degrees C or write “2” if you want the alarm when the temperature rises above 5 degrees C.
-
Page 19: Thermostat Function
Thermostat function If an electrical radiator is connected to the relay the unit can be used as a remote thermostat controller. By programming the desired temperature the unit will scan the temperature and activate the relay (and thus turn on the radiator) if the temperature drops one degree C below the set temperature. - Page 20 Deactivate the thermostat with SMS Deactivate the thermostat function by sending an SMS with the following content: ABCD#2# where ABCD is your personal PINCODE. -20-...
-
Page 21: Power Supply
In order to decrease power consumption you can turn off the short range radio if it not is used. The power consumption will then decrease with about 10 mA. The short range radio is not used if there is no extra relays (Ontech Relay 9010) or wireless alarm detectors. - Page 22 Important! If there has been a low battery alarm the unit has to be restarted or the voltage must rise above 12.5 V before it can send a new low battery alarm. -22-...
-
Page 23: Short Range Radio - Extra Relays
Do this by setting DIP switch number 6 to position ON, see page In a system with one Ontech GSM 9030 and one or more extra relays or wireless alarm detectors all has individual ID numbers. Up to 8 different unique numbers can be used, 1-8. -
Page 24: Reference
Indicates all alarms that have been activated since the last acknowledge. The number indicates the units ID number, Ontech 9030 is always no 1, and the others refer to the extra units ore wireless alarm detectors connected. Note that these inputs not can send an alarm again before the alarm has been acknowledged. -
Page 25: Sms About Power Supply
SIM card settings. Send an SMS to the unit with the following content: ABCD#8*2# where ABCD is your personal PINCODE. You will immediately receive an SMS as below: Content Exlanation *Ontech 9030 Asterisk (*) means alarm function is turned on Alarmrelay: Alarmrelay function; ON or OFF Tempwatch: <... -
Page 26: Commands
Commands This description is valid both for telephone button and SMS text. Command Explanation ABCD# All telephone calls and SMS starts with your personal PINCODE of 4 digits. When writing this symbol you are sending a command to the unit Thus, the symbol ends a command. -
Page 27: Push Button
Push button One push at the button activates or deactivates the relay. One push is also used to manually acknowledge an alarm. Push and hold for 5 seconds to turn on/turn off the unit if there is an backup battery connected. -
Page 28: The Dip Switch
ON= Alarm A and B are set to mode Normally Closed. These four switches are used to set the radio channel. If extra relays (Ontech Relay 9010) or wireless alarms are used in a system all units must have the same radio channel settings. -
Page 29: Tip
If you not are sure about the settings of the unit, you can ask it for a status-SMS. See page 24. To long distance between Ontech GSM 9030 and Extra relays or wireless alarm detectors A built-in function in all Extra relays and wireless alarm detectors is a radio repeater. This means that each extra unit increases the working range with about 30 meters. - Page 30 Ontech GSM 9030 .The extra unit will link the other two units together. Check if the extra unit (Ontech GSM 9030) has contact with the master unit One push of the button on the extra unit (Ontech Relay 9010) switches the relay but is also sending information about this to Ontech GSM 9030.
-
Page 31: Troubble Shooting
• Check so all units in a system has the same radio alarms channel. See page 23. Ontech GSM 9030 has no Out of radio range contact with an individual • Check by moving the extra unit closer to the extra unit. -
Page 32: Technical Specifications
Technical specifications GSM 900/1800 GSM subscription All kinds, also cash card Relay 230V/16A Serial interface Special for GPS adapter Short range radio Frequency 2,4 GHz Power output 1 mW Alarm inputs Activated either by NO or NC mode Maxi +/-50 V, 5 mA External power supply 9-24 V AC/DC Power consumtion... -
Page 33: Declaration Of Conformity
Declaration of conformity Ondico AB, Datavägen 14A, 436 32 Askim, Sweden, hereby declares that the product Ontech GSM 9030 is in conformity with the provisions of the Radio & Teleterminal directive R&TTE 1999/5/EG. -33-... - Page 34 -34-...
- Page 35 -35-...
- Page 36 www.ondico.se -36-...
Need help?
Do you have a question about the GSM 9030 and is the answer not in the manual?
Questions and answers