Inserting The Name Plate - Conrad 61 17 61 Operating Instructions Manual

7. Inserting the Name Plate

For inserting the name plate into the outdoor unit, it must be opened. Proceed as follows:
• Turn out the four casing screws at the edge so that the front plate can be taken off.
• Now the name plate can be easily inserted or replaced. Use, e.g. a piece of thin paper as
a name plate.
It is best to use a laser printer, since inkjet printer writing will fade quickly under sun
irradiation. Then cut the paper accordingly (name plate dimensions approx. 47 x 16mm).
• Re-attach the front plate and crew it tight.
31