Buffalo ABARL47 Installation Instructions

ITEM # ABARL47 / ABARL53 INSTALLATION INSTRUCTIONS ITEM # ABARL47 / ABARL53 INSTALLATION INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS BEFORE ASSEMBLY READ AND UNDERSTAND ALL WARNINGS BEFORE ASSEMBLY
PACKAGE CONTENTS:
TWO PIECES RACKS (EACH INCLUDES END CAP
AT EITHER SIDE)
SPECIFICATIONS:
ABARL47 = ALUMINUM RACK 47 INCH LENGTH
ABARL53 = ALUMINUM RACK 53 INCH LENGTH
EACH INCLUDES ANTI-THEFT LOCKING MECHANISM. EASY NO-DRILL INSTALLATION, FITS
MOST CARS/SUVS WITH ROOF MOUNTS. NO DRILLING REQUIRED FOR INSTALLATION.
YOU WILL NEED ONE PHILLIPS SCREWDRIVER FOR ASSEMBLY (NOT INCLUDED)
DO NOT EXCEED
165 LB MAX LOAD
(INCLUDES ALL ACCESSORIES)
ATTENTION
BE AWARE OF YOUR VEHICLE HEIGHT:
Adding accessories on top of the vehicle
changes the height requirements.
Do not use product if any part of the rack is
damaged or worn. Unsecured accessories
or cargo falling in road can cause serious
accidents and injury or death.
Drive safely, especially over bumps. Never
use crossbars off-road.
QUESTIONS? CONTACT BUFFALO CORPORATION CUSTOMER SERVICE 636-532-9888
TWO EACH
SUPPORT BRACES
WARNING WARNING
Do not secure load with bungee cords or any
strap that stretches. Secure properly with
tie-down straps so they don't come loose
during transport.
WARNING
NOT RECOMMENDED FOR USE WITH
KAYAKS
Objects that extend forward or behind your
vehicle must be tied down front and rear to
the bumper or tow hooks on your vehicle.
Obey speed limits and traffic cautions.
Speed should be reduced to adapt to the
road condition and load being carried.
TWO KEYS