Side Burner Troubleshooting - Weber 55554 Owner's Manual

Problem
Side Burner does not light.
Flame is low in HIGH position.
Flame is very yellow in
conjunction with the smell of gas,
OR
Burner makes popping noise in
conjunction with the smell of gas.
Push button ignition does not
work.
Side Burner maintenance
WARNING: All gas controls and supply valves
should be in the OFF position.
Make sure wire is connected between the igniter and
electrode. Adjust igniter electrode to burner. Gap should
be 1/8 to 3/16 inch from tip of electrode to burner. Spark
should be a white/blue color, not yellow.
(2)

Side Burner Troubleshooting

Check
Is gas supply off?
Is the fuel hose bent or kinked?
Inspect the Weber
Screens for possible obstructions.
(lockage of holes.)
Does burner light with a match?
(1)
Cure
Turn supply on.
Straighten hose.
® Insect / Spider Clean Weber
Screens (See section "Annual
Maintenance")
If match lights burner, checkigniter
(see below).
1) Igniter Wire
2) Venturi/Burner
3) 1/8 to 3/16 inch gap between electrode
and burner
D-5
® Insect / Spider
(3)