DOLD RP 5994 Installation / Monitoring Technique

Installation / Monitoring Technique
INFOMASTER B Common Alarm System, Bus Connection
New- / First- /Common Signal Annunciator
RP 5994, RP 5995
Circuit Diagrams
GND
S1 S2
1
A1 A2 Ra A B
23 13
CA CA
24 14
S1 S2 S3 S4 S5 S6
QX1 QX2 13
GND
S5 S6
2
RP 5994
GND
S1 S2
1
A1 A2 Ra A B
CA
S1 S2 S3 S4 S5 S6
QX1 QX2
GND
S5 S6
2
RP 5995
All technical data in this list relate to the state at the moment of edition. We reserve the right for
technical improvements and changes at any time.
RP 5994
RP 5995
GND
S3 S4
1
Rb Sh
S7 S8
14 23 24
GND
S7 S8
2
M9383_a
GND
S3 S4
1
Rb Sh
S7 S8
GND
S7 S8
2
M9521_a
New- / First- /Common Signal Annunciator RP 5994, RP 5995
• Fast localisation of failures and their causes
• Reduction of standstill times in production
• Adjustable operating modes:
New- / First signal annunciator according to DIN 19 235,
common alarm annunciator manual reset / auto reset settable
• Expandable from 8 to 88 fault signals
• Open or closed circuit operation settable
• Adjustable on delay for input signals 0 to 10 sec
• Reset buttons for audible alarm and common alarm on front side
• Connection for external reset of audible alarm, common alarm
EH 5994
and single alarm according to setting
• Galvanic separation to bus RS485 (optional)
• Accessories: buzzer RK 8832, display unit EH 5994, EH 5995
text display unit EH 5996, GMS-module RP 5810
• Width: 70 mm
Base module RP 5994:
- 8 fault signal inputs with indicator LED on the unit
- One relay output each for audible alarm and common alarm
- Reset buttons for audible alarm, common alarm, and single alarm
- Connection of remote reset button. Function according to setting
Extension module RP 5995:
- 8 fault signal inputs with indicator LED on the unit
- One relay output each for audible alarm and common alarm (on request)
- Reset buttons for audible alarm, common alarm, and single alarm
- Connection of remote reset button. Function according to setting
EH 5995
Display unit EH 5994, EH 5995
• Exchangable front label for individual legending
• As option galvanic separated RS458 bus
• Protection degree for front side IP 64
• Enclosure for flush mounting 96 x 96 mm
• Display unit EH 5994:
- 8 fault signal LEDs on the unit
- Reset buttons for audible alarm, common alarm and alarm signal
• Display unit EH 5995:
- 8 fault signal LEDs on the unit
- Without reset buttons
Additional Information about this topic
• General information for INFOMASTER B see data sheet
INFOMASTER B, System overview
• Information about the additional text display unit
see data sheet EH 5996
• Information about the additional GSM-module for alarm
and acknowledgement per SMS see data sheet RP 5810
Approvals and Markings
Circuit Diagram
A1 A2
S1 S2 S3
EH 5994, EH 5995
1
Ra A B Rb Sh
CA
S4 S5 S6 S7 S8
M9568_a
27.10.15 en / 605