Sony GB-A Series Instruction Manual page 67

(3) When the slider mounting surface has yet to meet
the specifications
When the mounting surface of the machine is a casting
surface, use a bracket. Place the bracket on the
underside of the slider without loosening the screws
thar hold the slider holder. Adjust the position of the
bracket and mount it with the supplied M4×12 bolts.
Slider holder
Slider
Mounting
bracket
Fig. 3-10
Scale
2-Plain washers
(small)
2-M4×12
(accessory)
4t/0.16" to 6t/0.24"
(4) When the bracket is mounted on slider's outer side
Align the mounting bracket with the slider's top surface,
and adjust the bracket so that the height from the scale
m o u n t i n g s u r f a c e i s b r o u g h t t o 2 1 ± 0 . 1 m m
(0.83"±0.004"). Ensure that the mounting bracket used
comes in a shape that accommodates the projecting
part of the slider holder. As shown in the figure, secure
the slider using two cap screws (M5×25 hexagon
socket head cap screws) and two nuts (for the M5 cap
screws).
Projecting part of the slider
2-ø5.5
ø0.22"
37/1.46"
Mounting bracket
Fig. 3-11
2-M5 nuts
(accessory)
2-M5×25
Slider
(accessory)
6 to 8t 21±0.1
0.24" to 0.31"t 0.83"±0.004"
51