widmer WM 9000 Instruction Manual page 45

7. PROGRAMMABLE TIMER
Programmable timer ON/OFF key.
TIMER-ON: The timer-on is used to turn on the unit automatically after the set time is over.
※After time setting, displaying time will flash for seconds. Please choose the function after the
flashing is stopped.
TIMER-OFF: The timer-off is used to turn off the unit automatically after the setting time is
over.
is above 3℃ .
When the room temperature less the set temperature is below
3℃, the unit operates at middle cooling capacity.
When the room temperature equal the set temperature, the
unit operates at minimum capacity.
If "HIGH" is selected, the unit operates at maximum cooling capacity
no matter what the setting temperature is . The "MEDIUM" OR
"LOW" comes to the same.
1. Press "Timer"key at stand-by status(off mode) to set the time. After
setting the time, then choose the function you need.(cooling,
dehumidifying.)
2. Once the set hour has come to an end, the unit will turn on
automatically.
3. Press the "POWER" key before time out, the set time will be
cancelled and the unit will turn on.
1. Press the "TIMER" key at operating mode status to set the time
desired.
2. Once the set hour has come to an end, the unit will turn off
automatically.
3. By pressing the "POWER" key before the time has been reached,
the set time will be cancelled and the unit will turn off.
7