Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Laptop
  5. Eee PC 900
  6. Installation manual

Asus Eee PC 900 Installation Manual

Touchkit setup
Hide thumbs Also See for Eee PC 900:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
TouchKit Setup
Package Content
Controller Board Preparation
Reminder:
NOT tightened all the way down. Discontinue action
immediately as soon as force is felt on the housing.
Further tightening of the screws will cause touch
screen to crack resulting in inaccurate cursor.
Apply rubber adhesive on the bottom side of the controller board as
.
insulation
Be extremely careful when putting back on
the LCD housing; make sure the screws are

Advertisement

loading

Related Manuals for Asus Eee PC 900

Summary of Contents for Asus Eee PC 900

  • Page 1 TouchKit Setup Reminder: Be extremely careful when putting back on the LCD housing; make sure the screws are NOT tightened all the way down. Discontinue action immediately as soon as force is felt on the housing. Further tightening of the screws will cause touch screen to crack resulting in inaccurate cursor.
  • Page 2 Eee PC 900 Installation Guide Step 1. Remove all 6 screws for LCD housing. Step 2. Remove all 6 screws for bottom housing. Step 3. Remove keyboard by pushing in the 3 springs.
  • Page 3 Step 4. Remove both FPC for keyboard and touchpad in the direction indicated. Step 5. Remove all 9 screws for keyboard housing. Step 6. 1. Use thin double-sided tape to secure the touch screen panel on the metal frame of the LCD module. 2.
  • Page 4 Step 7. Detach the old connector to the camera module and replace it Camera Harness provided by the TouchKit. Step 8. Remove both screws on each side of the LCD module to detach the LCD brackets. This is to lower the LCD module to accommodate the thickness of the touch screen panel.
  • Page 5 Step 10. Place Shock Absorber Rubber on the metal frame surrounding the touch screen panel. Step 11. Remove camera connector. Step 12. 1. Connector placement for touch screen panel. 2. Camera port on the motherboard to USB input on the controller (Hub Harness) 3.
  • Page 6 Be extremely careful when putting back on the LCD housing; make sure the screws are NOT tightened all the way down. Discontinue action immediately as soon as force is felt on the housing. Further tightening of the screws will cause touch screen to crack resulting in inaccurate cursor.