Celestron Nightscape 8300 Manual page 7

note: If the launch screen does not automatically appear when the cd is inserted
into your computer, you can either:
select the "launcher.exe" file from the AstroFX cd, or
right-click on the cd-roM icon and select "Install or run Program"
2. Press the Install AstroFX button to begin installation.
3. Follow the Installshield wizard to complete installation.
For 64-bit computers, you will need to install the 64-bit skin support application.
Press oK when the following screen appears.
figure 3: 64-bit skin suPPort PromPt
4. Press the close button on the launch screen when complete.
5. once installed, the AstroFX icon should appear on your computer's desktop. Before
opening AstroFX, follow the instructions that follow on powering the camera and
installing the drivers.
www.celestron.coM
6.