Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Milkotester ET – W24
- Page 1 Dry incubator Operation manual www.milkotester.com www.milkanalyzers.eu...
- Page 2 Milkotester Ltd Thermostatic device Milkotester dry incubator is very simple to use device for detection on antibiotics in raw milk. For safe and dependable operation, please follow the instructions in this manual when operating: • Verify that the input voltage on the AC Adapter and the plug type matches the local AC power supply.
-
Page 3: Table Of Contents
Milkotester Ltd Thermostatic device 2. Factory settings Two independent working modes (Mode 1 and Mode 2) are available in the incubator. Each of them can be set with desired temperature and time. The temperature setting is in range from 30°C to 80 °C thru 0.10 of degree. Time range is from 1 min to 600 min, thru one minute. - Page 4 Milkotester Ltd Thermostatic device 3. Setting of working mode 1 Enter working mode 1 3.1 The thermostatic device must be turned off from the power supply 3.2 Press the button UP and turn on the power by keeping the button pressed.
- Page 5 Milkotester Ltd Thermostatic device After you set working mode 1 or 2 you must set the desired time and temperature. 5. Setting temperature and time 5.1 Turn off the device from the power supply. 5.2 Press the button SET and turn on the power by keeping the button pressed.
- Page 6 Milkotester Ltd Thermostatic device Attention: In entry of mode SET UP, temperature and time values are reset! When change the temperature to a lower value (for example: from 60 to 40 degrees) you must wait until heater plate gets cooler (switch off the device for 30 minutes) 6.
-
Page 7: Et - W24
Milkotester Ltd Thermostatic device Model ET – W24 Application Incubating antibiotic test for raw milk Compatible test/ tube Eclipse 50 , Eclipse 100 , Twinsensor Time range 0 to 600 min. Temperature range 30° C to 80°C Mode 1 Temperature : 40° C ... -
Page 8: Mode 1
Milkotester Ltd Thermostatic device Model Rosa – W2 Application Incubating antibiotic test for raw milk Compatible test/ tube Charm Rosa Time range 0 to 600 min. Temperature range 30° C to 80°C Mode 1 Temperature : 40° C Timer 1: 1min. - Page 9 Milkotester Ltd Thermostatic device Model BS – W8 Application Incubating antibiotic test for raw milk Compatible test/ tube Beta Star , Beta Star combo Time range 0 to 600 min. Temperature range 30° C to 80°C Mode 1 Temperature : 47° C ...
-
Page 10: Dc - W14
Milkotester Ltd Thermostatic device Cover Box material Stainless steel Model DC – W14 Application Incubating antibiotic test for raw milk Compatible test/ tube Delvotest , Copan Time range 0 to 600 min. Temperature range 30° C to 80°C Mode 1 ... -
Page 11: Mode 1
Milkotester Ltd Thermostatic device Model CH – W12 Application Incubating antibiotic test for raw milk Compatible test/ tube Charm Time range 0 to 600 min. Temperature range 30° C to 80°C Mode 1 Temperature : 56° C Timer 1: 10min. - Page 12 Milkotester Ltd Thermostatic device 8. Cleaning: ATTENTION! In order not to damage any part of the thermostatic device, please follow the cleaning instructions below: Clean the metal cover box of the thermostatic device with ethyl alcohol and soft cloth. Clean the plastic parts and covers of the thermostatic device with...
- Page 13 MILKOTESTER products are warranted against defects in materials and workmanship from the date of delivery trough the duration of the warranty period. During the warranty period Milkotester will repair, or, at its option, replace any components (S) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to MILKOTESTER.
Need help?
Do you have a question about the ET – W24 and is the answer not in the manual?
Questions and answers