Table of Contents
Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
Bolt Length
GRANITE6, Cable Motion Gym, 150 lbs. Weight Stack
Overall Dimensions: 81.75" L x 50.375" W x 83.25" H
MG-GRANITE
MG-GRANITE
www.nlfit.com
December 07, 2010
Specifications
Weight
= 365.5 lbs
Packed in 5 Boxes
Box 1
= 40" x 28.5" x 11.75"
= 7.75 ft³
= 110.5 lbs
Box 2
= 75" x 22.5" x 9.5"
= 9.28 ft³
= 105 lbs
Box 3
= 12.5" x 5" x 8.5"
= 0.307 ft³
= 50 lbs
Box 4 & 5 = 12.5" x 5" x 6.25"
= 0.226 ft³
= 50 lbs (each)
Advertisement
Table of Contents
Summary of Contents for NL MG-GRANITE GRANITE6
- Page 1 MG-GRANITE ASSEMBLY INSTRUCTIONS Bolt Length Specifications Weight = 365.5 lbs Packed in 5 Boxes Box 1 = 40" x 28.5" x 11.75" = 7.75 ft³ = 110.5 lbs GRANITE6, Cable Motion Gym, 150 lbs. Weight Stack Box 2 = 75" x 22.5" x 9.5" = 9.28 ft³...
- Page 2 Parts list Item Description ......Qty Bag # Item Description ......Qty ... Box # Lower Frame ......1 ..2 3/8" x 1-3/4" Bolt ....... 7 ..1 Rear Base....... 1 ..1 3/8" x 2-1/4" Bolt ....... 1 ..1 3/8"...
- Page 3 13 L 13 R Lot Label...
- Page 4 Where Shown 18 Places 5/8" Jam Nuts Install Item 6 with 5/8" x 3-1/4" lg 13 L tubes on the bottom side. 5/8" Jam Nuts 13 R Typical 14 Places 1. Loosely bolt Lower Frame (1) & 2 Press Arm Braces R&L (7) to Rear Base (2) using bolting shown. 2.
- Page 5 9. Place Weight Stack Supports (26) over holes in Rear Base, place Rubber Cushions (AI) over holes in Weight Stack Support and slide the 2 - Guide Rods (9) through them into Rear Base.NOTE: For improved performance, we recommend you apply a silicone lubricant to the guide rods prior to their installation.
- Page 6 NOTE: Install all Pulleys (AO & AP) with the shown spacers & bolting. 16. Start installation of the Stack Cable (AU) by partially threading the hollow bolt into the Selector Rod. Install the Pulley above the Selector Rod & loop the Stack Cable over it.
- Page 7 Jam Nut 2 Places 11 Places 24. Complete installation of 2 Places Cables by threading the end of the Stack Cable (AU) into the 4 Places 4 Places Selector Rod (23) until slackness in the cables is Typical 2 Places removed.
- Page 8 4 Places Where Shown 6 Places 6 Places 6 Places 25. Bolt the Knee Roller Support (12) to the Main Upright (3) using bolting shown. 26. Bolt the Back Pad (28) to the Main Upright using bolting shown. 27. Bolt the Seat Pad (29) to the Seat Support (10) bolting shown. Install 2 - 1" x 2" Plastic Caps (AD). Insert Seat Support into the Lower Frame where shown.
- Page 9 NORTHERN LIGHTS NORTHERN LIGHTS FITNESS PRODUCTS INC. FITNESS PRODUCTS INC. Cher Client: Dear Customer: Merci d’avoir sélectionneé un produit Northern Lights. Nous espérons Thank you for selecting Northern Lights Exercise Equipment. We que vous aimerez et bénéficierez de votre nouveau produit pour des hope that you will enjoy and benefit from your new fitness product for années à...