1.
Place the product in the desired position on a flat surface.
2.
Place a water level on the product.
3.
The product must be placed with feet (1) to provide adequate air circulation
around the cabinet. This guarantees optimal operation of the product as well
as a reducing energy consumption. In the unlikely event of a
refrigerant leakage, this reduces the risk of a flammable mixture
to accumulate. The legs can be used to level the product properly.
4.
Adjust the stands (1) with 6 mm Allen wrench in the openings (2) until the
product is level
5.
Tighten the screws (3) of the foot pieces (1), at the bottom, with a wrench,
when the adjusting device is not accessible from the inside.
6.
Plug the openings (2) on the inside with the supplied caps
User manual
Placing the appliance
53