Safety Precautions TO PREVENT ANY POSSIBLE DAMAGE, ACCIDENT, OR INJURY, PLEASE PAY ATTENTION TO THE FOLLOWING CAUTIONS: • DO NOT let children play on the chair. • DO NOT attempt to uninstall, repair, and modify the chair without the technician’s accompanying.
• Users need only finger tips to press the buttons on the remote control. • Turn off the power after finishing using the chair. Structu TS-8800 Air Pressure for Shoulders Air Pressure for Armrest Headrest Pillow Air Pressure for TFT-LCD Remote Control...
Page 6
Structure TS-8700 Air Pressure for Shoulders Air Pressure for Armrest Headrest Pillow Air Pressure for Shoulders 7”Touch Panel Remote Control Air Pressure for Air Pressure for Buttocks Armrest Seat Cushion Caster Power Cord Socket Fuse Cartridge Air Pressure for Footrest Power Switch - 3 -...
Setup Inst ructions TS-8800 Step 1 : Take out the chair from the carton. Pull straight the backrest until you hear a ‘’click’’ sound. Step 2 : Please follow steps below to install the armrest and shoulder part. a. Assemble air tubes. Make sure the color is matched.
Page 8
Setup Inst ructions TS-8700 Step 1 : Take out the chair from the carton. Pull straight the backrest until you hear a ‘’click’’ sound. Step 2 : Install the remote control holder by ratcheting wrench and tie tightly. Step 3 : Please follow steps below to install the armrest and shoulder part.
Product Functions and Descriptions SYSTEM BUTTONS Power: Press this button while the chair is activated that causes the rollers and chair angle to return to their storage positions before the chair is restored. Stop: Press this button to shut the chair off immediately in an emergency or if there is a malfunction during operating.
Page 10
SEMI-AUTO MASSAGE Preset 12 minutes program mainly for shoulder massage. Preset 12 minutes program mainly for back massage. Preset 12 minutes program mainly for waist massage. AIR MASSAGE : The solo roller will be automatically worked when choosing foot air massage The program is mainly designed for arm, foot and seat air massage.
Page 11
Press this button to turn on/ off the shiatsu function. It’s preset to massage full body. Press twice will stop working. For adjusting the width of the rollers in three steps for wide, medium and narrow. Press this button for 6 different speeds. This function can be used with other manual functions.
Please prepare a headphone if you would like to listen to the music while massaging. Step 2 Please operate the TS-8800 Massage Chair the by following steps. Automatic Massage Functions When you press any auto programs, it will automatically adjust the angle of the chair.
Product Specifications Model : TS-8800 /TS-8700 4D massage chair Power Voltage : □110V □230V Power Consumption: 120W Chair Dimensions: Straight: 155cm(L)x81cm(W)x120cm(H) Recline: 195cm(L)x81cm(W)x91cm(H) Weight:107 kgs The place of origin: Taiwan - 10 -...
Basic Troubleshooting Guide Problem Troubleshooting Methods No power 1.Make sure power switch is on, the line icon (-) should be pushed in - Test Chair, continue to next step if needed. 2.Check each end of the power cord (where the power cord plugs into the chair and where it plugs into the wall outlet) and make sure each end is securely plugged in –...
Page 15
Footrest / Backrest / Rotate 1. Remove the right armrest (when sitting on the chair) and loose the leg cover of the chair. (Reference page motor can not go up / down 14 ). So the bottom of the chair is exposed. 2.
Basic Replacement Guide Please Note – Always unplug the power cord of the chair from the wall outlet when replacing and/or maintaining any part/s of the chair. How to replace the fuse (near the power switch) 1. Turn off the power switch, and unplug the power cord from the chair.(reference picture 1) 2.
Page 17
How to replace the massage module in the backrest 1. Release the bottom lock beneath the back cover of the chair, and push forward the chair backrest so that it rests on top of the chair seat cushion. (Reference picture 1) 2.
Page 18
Picture 3 : Picture 4: Loosen the screws. Unplug the connec�ons - 15 -...
Page 19
How to r eplace the motors (Located underneath the chair) 1. Unzip the zipper on the edge of the seat. (Reference picture 1 and 2) 2. Tear off the Velcro that attached on the seat. (Reference picture 3) 3. Loosen the six chrome screws on the underneath of the seat. (Reference picture 4) 4.
Page 20
Picture 7 : Picture 8 : Disconnect 2 air hoses from chair. Loosen the 4 screws, and remove the partition on the right side of chair. Picture 9: Diagram of connec�ons Diagram Picture 10 : of motors Footrest motor Inversion recline motor Back recline motor Foot lengthen motor - 15...
Page 21
How to replace the air hoses of thigh str etch massage. 1. Tear off the Velcro. Then find three air hoses under the seat cushion. 2. Reconnect the color coded plugs. 3. Place the seat cushion back and test the thigh stretch function. Picture 1 : Picture 2 : Tear off the Velcro.
Page 22
Picture 1 : Picture 2 : Zipper on the edge of seat. Unz ip th e z ip p er fr om th e se at cushion. Picture 3 : Picture 4 : Tear off th e Velcro and loosen 6 Lo os en th e th es e s c r e ws Th en remove the black cloth.