ClimaRad Ventura V1C User Instructions

User instructions ClimaRad Ventura V1C
Operating principle ClimaRad Ventura V1C
The ClimaRad Ventura V1C is equipped with sensors for CO , humidity, indoor and outdoor temperature and
pressure sensors for balance control. They measure the air quality and automatically determine the required
ventilation for each room. The device also features convectors, allowing the unit to ventilate, heat and
(optionally) cool.
Operating the ClimaRad Ventura V1C
The control panel is situated on the front of the device. You can find the function buttons and notifications of the
panel in question on page 2 of this instruction manual.
The ClimaRad Ventura V1C in your room is optimally configured by the installer and functions fully automatically.
That is why we only explain the function buttons that are relevant for you during daily use.
Operating the ClimaRad Round
You can set the desired temperature yourself by turning the ring.
Turn left for lower temperatures, turn right for higher temperatures.
2
ClimaRad Ventura V1C
F u t u r e c o m f o r t t o d a y